I.S. EN 61481:2001
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C.
Hardcopy , PDF
01-16-2015
English
06-29-2001
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Definitions
4 Requirements
4.1 General requirements
4.2 Functional requirements
4.3 Electrical requirements
4.4 Mechanical requirements
4.5 Markings
5 Tests
5.1 General
5.2 Function tests
5.3 Dielectric tests
5.4 Mechanical tests
6 Quality plan and acceptance tests
6.1 General
6.2 Records
Annex A (normative) Chronology of tests
Annex B (normative) Instructions for use
Annex C (normative) Sampling procedure
Annex D (normative) Mechanical shock test - Pendulum method
Annex E (normative) Symbol for marking
Annex F (informative) Acceptance tests
Annex G (informative) In-service care
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Covers portable phase comparators with or without a built-in power source to be used on electrical systems for voltages from 1 kV to 36 kV a.c. and frequencies from 50 Hz to 60 Hz.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017) 2001 Edition is Partially Superseded by I.S. EN 61481-1 & I.S. EN 61481-2. (07/2017)
|
| DocumentType |
Standard
|
| Pages |
118
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NF EN 61481 : 2001 AMD 2 2005 | Identical |
| DIN EN 61481 : 2002 AMD 2 2006 | Identical |
| UNE-EN 61481:2002 | Identical |
| EN 61481:2001/A2:2005 | Identical |
| NBN EN 61481 : 2002 AMD 2 2006 | Identical |
| BS EN 61481:2001 | Identical |
| IEC 61481:2001+AMD1:2002+AMD2:2004 CSV | Identical |
| SN EN 61481 : 2001 | Identical |
| IEC 60855:1985 | Insulating foam-filled tubes and solid rods for live working |
| IEC 61235:1993 | Live working - Insulating hollow tubes for electrical purposes |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60050-601:1985 | International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 29004 : 1987 | QUALITY MANAGEMENT & QUALITY SYSTEM ELEMENTS - GUIDELINES |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| IEC 61318:2007 | Live working - Conformity assessment applicable to tools, devices and equipment |
| EN 60071-1:2006/A1:2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| EN 61235:1995 | Live working - Insulating hollow tubes for electrical purposes |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| IEC 60050-651:2014 | International Electrotechnical Vocabulary (IEV) - Part 651: Live working |
| EN 60651:1994/A2:2001 | SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| EN 60068-2-32:1993 | Basic environmental testing procedures - Part 2: Tests - Test Ed: Free fall |
| IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 60855:1996 | Insulating foam-filled tubes and solid rods for live working |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.