I.S. EN 61310-2:2008
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Marking for identification and for safe use
4.1 General
4.2 Marking of complete machinery
4.3 Marking for safe use
5 Application of markings
5.1 General
5.2 Representation of rated values
6 Marking of connections
6.1 General
6.2 Mechanical connections
6.3 Connections for fluid systems
6.4 Electrical connections
7 Durability of markings and their attachment
Annex A (informative) Graphical symbols and safety signs
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Annex ZZ (informative) Coverage of Essential Requirements
of EC Directives
Annex ZZA (informative) Coverage of Essential Requirements
of Directive 98/37/EC
Annex ZZB (informative) Coverage of Essential Requirements
of Directive 2006/42/EC
Bibliography
Presents general rules on marking for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections.
DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
NBN EN 61310-2 : 2008 | Identical |
DIN EN 61310-2:2008-09 | Identical |
NEN EN 61310-2 : 1996 | Identical |
SN EN 61310-2 : 2008 | Identical |
UNE-EN 61310-2:2008 | Identical |
EN 61310-2:2008 | Identical |
IEC 61310-2:2007 | Identical |
BS EN 61310-2:2008 | Identical |
NF EN 61310-2 : 2008 | Identical |
ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
HD 245.4 : 200S1 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - SYMBOLS OF QUANTITIES TO BE USED FOR ROTATING ELECTRICAL MACHINES |
EN 60027-3 : 2007 | Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units |
EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 60027-1:2006/A2:2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL |
EN 60027-2:2007 | Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
ISO 31-0:1992 | Quantities and units Part 0: General principles |
IEC 61346-1:1996 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
ISO/IEC Guide 37:2012 | Instructions for use of products by consumers |
IEC 60027-3:2002 | Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
IEC 60027-2:2005 | Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
IEC 60027-4:2006 | Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.