I.S. EN 61076-2-105:2008
Current
The latest, up-to-date edition.
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 General information
1.1 Scope
1.2 Recommended method of termination
1.2.1 Number of contacts or contact cavities
1.3 Ratings and characteristics
1.4 Normative references
1.5 Marking
1.6 IEC type designation
1.7 Ordering information
1.8 Safety aspects
2 Technical information
2.1 Terms and definitions
2.2 Survey of styles and variants
2.2.1 Fixed connectors
2.2.2 Free connectors
3 Dimensions
3.1 General
3.2 Interface dimensions
3.2.1 Pin front view
3.3 Gauges
4 Characteristics
4.1 Climatic category
4.2 Electrical
4.2.1 Rated voltage - Rated impulse voltage - Pollution
degree
4.2.2 Voltage proof
4.2.3 Current-carrying capacity
4.2.4 Contact resistance
4.2.5 Insulation resistance
4.3 Mechanical
4.3.1 IP degree of protection
4.3.2 Mechanical operation
4.3.3 Insertion and withdrawal forces
4.3.4 Contact retention in insert
4.3.5 Polarizing method
4.3.6 Vibration (sinusoidal)
5 Test schedule
5.1 General
5.1.1 Arrangement for contact resistance measurements
5.1.2 Arrangement for dynamic stress tests (vibration)
5.2 Test schedule
5.2.1 Test group P - Preliminary
5.2.2 Test group AP - Dynamic/climatic
5.2.3 Test group BP - Mechanical endurance
5.2.4 Test group CP - Electrical load
5.2.5 Test group DP - Chemical resistivity
5.2.6 Test group EP - Connection method tests
Annex A (informative) Diameter of the female connector
body
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Bibliography
Describes circular connectors with M5 screw-locking, typically used for industrial process measurement and control.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
70
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| IEC 61076-2-105:2008 | Identical |
| EN 61076-2-105:2008 | Identical |
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| EN 60068-2-60:2015 | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
| IEC 61076-2-001:2011 | Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification |
| IEC 61984:2008 | Connectors - Safety requirements and tests |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-60:2015 RLV | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 61984:2009 | Connectors - Safety requirements and tests |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.