I.S. EN 60861:2008
Current
The latest, up-to-date edition.
EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of equipment
5 Equipment design
5.1 Measurement and indication characteristics
5.2 Reliability
5.3 Sampling assembly
5.4 Detection assembly
5.5 Control assembly
5.6 Measurement assembly
5.7 Alarm assembly
5.8 Indication facilities
5.9 Facilities for operational testing
5.10 Installation and maintenance facilities
5.11 Ambient ionizing radiation protection devices
5.12 User safety
5.13 Electromagnetic compatibility
5.14 Power supply
6 Test procedures
6.1 General
6.2 Tests performed under standard test conditions
6.3 Tests performed with variation of influence quantities
6.4 Metrological characteristics
6.5 Test sources
7 Radiation performance tests
7.1 Reference response
7.2 Sensitivity and relative response of the equipment for
a solid source
7.3 Linearity
7.4 Repeatability of the equipment
7.5 Reproducibility of results of measurements
7.6 Response time
7.7 Uniformity of the protective screens for the beta detector
7.8 Overload test
7.9 Response to other artificial radionuclides
7.10 Response to [222]Rn progeny dissolved in water
7.11 Response to ambient gamma radiation
7.12 Influence of materials in suspension in liquid on activity
measurement
8 Liquid circuit performance tests
8.1 General
8.2 Flow-rate stability
8.3 Cleaning efficiency
9 Electrical performance tests
9.1 Warm-up time - Detection and measurement assemblies
9.2 Power-supply variations
9.3 Power-supply transient effects
9.4 Alarm-trip stability
9.5 Alarm-trip range
9.6 Fault alarm
10 Environmental performance test
10.1 Ambient temperature
10.2 Relative humidity
10.3 External electromagnetic immunity and electrostatic
discharge
10.4 Electromagnetic emission
11 Type test report
12 Certificate
13 Operation and maintenance manual
Annex A (informative) Guidance for use with radioactive water
Monitors
Annex B (informative) Realization of an artificial effluent for
testing
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Specifies technical requirements for equipment for monitoring of alpha-, beta- or gamma-emitting radio nuclides in liquid effluents and surface waters, provides some general guidance as to the possible detection capability of such equipment and indicates when and where its uses may be practicable.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 60861:2008 | Identical |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60050-394:2007 | International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| IEC 61187:1993 | Electrical and electronic measuring equipment - Documentation |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
| IEC 60068-2-38:2009 | Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| EN 60068-2-38:2009 | Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN 61000-4-12:2017 | Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| EN 61187:1994/corrigendum:1995 | ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| IEC 60050-393:2003 | International Electrotechnical Vocabulary (IEV) - Part 393: Nuclear instrumentation - Physical phenomena and basic concepts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.