I.S. EN 60268-7:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SOUND SYSTEM EQUIPMENT - PART 7: HEADPHONES AND EARPHONES
Hardcopy , PDF
11-24-2020
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Classification, designation and coding
5 Marking of terminals, controls and polarity
6 User instructions
7 Conditions for specifications and measurements
8 Characteristics to be specified and their methods of
measurement
9 Classification of characteristics
Annex A (normative) - Pinna simulators for measurements of
headphones and earphones
Annex B (normative) - Specification and conditions of use of
a microphone for use inside the ear canal
Annex C (informative) - Practical details of free-field
comparison conditions
Annex D (informative) - Practical details of diffuse-field
comparison conditions
Annex E (informative) - Practical details of the subjective
comparison and ear canal sound pressure level
conditions
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Pertains to headphones, headsets, earphones and earsets, intended to be used on, or in, the human ear.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 60268-7 : 2011 | Identical |
| NF EN 60268-7 : 1996 | Identical |
| EN 60268-7:2011 | Identical |
| DIN EN 60268-7:2011-08 | Identical |
| IEC 60268-7:2010 | Identical |
| SN EN 60268-7 : 1996 | Identical |
| UNE-EN 60268-7:2013 | Identical |
| BS EN 60268-7:2011 | Identical |
| IEC 60038:2009 | IEC standard voltages |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60318-3:2014 | Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC GUIDE 106:1996 | Guide for specifying environmental conditions for equipmentperformance rating |
| HD 443 : 200S1 | OCCLUDED-EAR SIMULATOR FOR THE MEASUREMENT OF EARPHONES COUPLED TO THE EAR BY EAR INSERTS |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| HD 483.11 : 200S3 | SOUND SYSTEM EQUIPMENT - APPLICATION OF CONNECTORS FOR THE INTERCONNECTION OF SOUND SYSTEM COMPONENTS |
| ISO 4869-1:1990 | Acoustics Hearing protectors Part 1: Subjective method for the measurement of sound attenuation |
| IEC 60711:1981 | Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts |
| EN 24869-1:1992 | Acoustics - Hearing protectors - Subjective method for the measurement of sound attenuation (ISO 4869-1:1990) |
| IEC 60050-801:1994 | International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics |
| IEC 60318-5:2006 | Electroacoustics - Simulators of human head and ear - Part 5: 2 cm<sup>3</sup> coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts |
| EN 60268-12:1995/A2:1995 | SOUND SYSTEM EQUIPMENT - APPLICATION OF CONNECTORS FOR BROADCAST AND SIMILAR USE |
| IEC 60318-2:1998 | Electroacoustics - Simulators of human head and ear - Part 2: An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN ISO 4869-3:2007 | Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
| IEC 60263:1982 | Scales and sizes for plotting frequency characteristics and polar diagrams |
| EN 60086-1:2015 | Primary batteries - Part 1: General |
| IEC 61938:2013 | Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability |
| ISO 18233:2006 | Acoustics Application of new measurement methods in building and room acoustics |
| ISO 4869-3:2007 | Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
| HD 483.1 : 200S2 | SOUND SYSTEM EQUIPMENT - GENERAL |
| IEC 60086-1:2015 | Primary batteries - Part 1: General |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| IEC TR 60959:1990 | Provisional head and torso simulator for acoustic measurements on air conduction hearing aids |
| ISO 7029:2017 | Acoustics — Statistical distribution of hearing thresholds related to age and gender |
| IEC 60118-0:2015 | Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids |
| HD 483.2 : 200S2 | SOUND SYSTEM EQUIPMENT - EXPLANATION OF GENERAL TERMS AND CALCULATION METHODS |
| IEC 60318-1:2009 | Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.