I.S. EN 60034-1:2010
Current
The latest, up-to-date edition.
ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
Hardcopy , PDF
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Duty
5 Rating
6 Site operating conditions
7 Electrical operating conditions
8 Thermal performance and tests
9 Other performance and tests
10 Rating plates
11 Miscellaneous requirements
12 Tolerances
13 Electromagnetic compatibility (EMC)
14 Safety
Annex A (informative) - Guidance for the application of duty
type S10 and for establishing the value of relative
thermal life expectancy TL
Annex B (informative) - Electromagnetic compatibility (EMC)
limits
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Annex ZZ (informative) - Coverage of Essential Requirements
of EC Directives
Bibliography
Applies to all rotating electrical machines except those covered by other IEC standards, for example, IEC 60349.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
77
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 60034-1 : 2011 | Identical |
| EN 60034-1:2010/corrigendum Oct. 2010 | Identical |
| UNE-EN 60034-1:2011 | Identical |
| BS EN 60034-1:2010 | Identical |
| IEC 60034-1:2017 | Identical |
| SN EN 60034-1 : 2010 | Identical |
| NF EN 60034-1 : 2011 | Identical |
| NBN EN 60034-1 : 2011 | Identical |
| IEC 60038:2009 | IEC standard voltages |
| EN 60034-30:2009 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| IEC 60034-9:2003+AMD1:2007 CSV | Rotating electrical machines - Part 9: Noise limits |
| IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
| EN 60085:2008 | Electrical insulation - Thermal evaluation and designation |
| IEC 60034-29:2008 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| IEC 61293:1994 | Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
| IEC 60050-411:1996 | International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
| EN 60027-1:2006/A2:2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL |
| EN 60034-3:2008 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| EN 60034-12:2017 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| EN 60034-15:2009 | Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines |
| IEC 60034-8:2007+AMD1:2014 CSV | Rotating electrical machines - Part 8: Terminal markings anddirection of rotation |
| EN 60034-8:2007/A1:2014 | ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION (IEC 60034-8:2007/A1:2014) |
| IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| EN 60027-4:2007 | Letter symbols to be used in electrical technology - Part 4: Rotating electrical machines |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| IEC 60034-12:2016 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 60027-4:2006 | Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
| EN 61293:1994 | Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60034-30:2008 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.