I.S. EN 506:2008
Current
The latest, up-to-date edition.
ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF COPPER OR ZINC SHEET
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 General
3.2 Materials
3.3 Profile definitions
3.4 Product geometry
3.5 Symbols and abbreviations
4 Requirements
4.1 General
4.2 Materials
4.2.1 Copper
4.2.2 Organic coatings or chemical treatments on
zinc-copper-titanium
4.2.3 Material tolerances
4.3 Products
4.3.1 Mechanical resistance
4.3.2 Calculation
4.3.3 Dimensions
4.3.4 Dimensional tolerances for the profiled sheets
4.3.5 Safety in case of fire
5 Test methods
5.1 Material properties
5.2 Structural properties
6 Designation
7 Marking, labelling and packaging
7.1 Marking and labelling
7.2 Packaging and special ordering conditions
7.3 Transport, storage and handling
Annex A (normative) Dimensional tolerances
A.1 Tolerances for trapezoidal sheets
A.1.1 General
A.1.2 Depth of profile
A.1.3 Depth of stiffeners
A.1.4 Pitch
A.1.5 Widths of crown and valley
A.1.6 Cover width
A.1.7 Radius of bends
A.1.8 Deviation from straightness
A.1.9 Deviation from squareness
A.1.10 Length
A.1.11 Deviation of side lap
A.1.12 Curve radius and angles
A.2 Tolerances for sinusoidal profiles
A.3 Tolerances on tiles
A.3.1 General
A.3.2 Depth of tile
A.3.3 Web angular displacement (Figure A.12)
A.3.4 Pitch
A.3.5 Width of crown and valley (Figure A.14)
A.3.6 Cover width
A.3.7 Radius of bends
A.3.8 Deviation from straightness
A.3.9 Deviation from squareness
A.3.10 Length
A.3.11 Contraction or bulging
A.4 Methods for measuring profiles
A.4.1 General
A.4.2 Depth of profile
A.4.3 Depth of stiffeners
A.4.4 Pitch
A.4.5 Width of crown and valley
A.4.6 Cover width
A.4.7 Radius of bends
A.4.8 Straightness
A.4.9 Squareness
A.4.10 Length
A.4.11 Side laps
A.4.12 Side lap ripple
Annex B (informative) Test methods for concentrated load
Bibliography
Describes requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings.
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 506:2010 | Identical |
| NBN EN 506 : 2008 | Identical |
| NEN EN 506 : 2008 | Identical |
| SN EN 506 : 2008 | Identical |
| DIN EN 506:2009-07 | Identical |
| NS EN 506 : 2ED 2008 | Identical |
| BS EN 506:2008 | Identical |
| EN 506:2008 | Identical |
| UNI EN 506 : 2008 | Identical |
| NF EN 506 : 2008 | Identical |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| EN 988:1996 | Zinc and zinc alloys - Specifications for rolled flat products for building |
| EN 1172:2011 | Copper and copper alloys - Sheet and strip for building purposes |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| NFP 34 503 : 1995 | PROFILED SHEETING MADE OF COATED OR NON-COATED STEEL SHEET AND PANELS - BENDING TESTS UNDER LINEAR LOADS AND/OR UNDER CONCENTRATED LOADS |
| ISO 431:1981 | Copper refinery shapes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.