I.S. EN 50508:2009
Current
The latest, up-to-date edition.
MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
Hardcopy , PDF
English
01-01-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Materials
4.2 Dimensions
4.3 Mechanical requirements
4.4 Electrical requirements
4.5 Marking
4.6 Instructions for use
5 Verification and testing
5.1 General
5.2 Electrical test
5.3 Mechanical verifications and tests
5.4 Mechanical tests
6 Classification of defects
Annex A (normative) - Instructions for use
Annex B (informative) - Wet conditions test
Annex C (informative) - Recommended sticks
Annex D (informative) - Test tools for recommended heads
Annex E (normative) - Marking: Information on the labels
Annex F (informative) - Bending calculation
Annex G (normative) - Test sequence
Annex H (informative) - Classification of defects
Annex I (informative) - Periodic maintenance test
Bibliography
Defines the requirements and tests to be fulfilled by the multipurpose insulating sticks intended to perform a range of operations in high voltage installations by means of the attached appropriate tools.
| DocumentType |
Standard
|
| Pages |
41
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 50508:2009 | Identical |
| IEC 61477:2009 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60212:2010 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| IEC 60855:1985 | Insulating foam-filled tubes and solid rods for live working |
| IEC 61235:1993 | Live working - Insulating hollow tubes for electrical purposes |
| IEC 60832:1988 | Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60050-601:1985 | International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General |
| EN 61230:2008 | LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
| EN 61243-2:1997/A2:2002 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| HD 637 S1:1999/corrigendum:2005 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
| IEC 61243-2:1995+AMD1:1999+AMD2:2002 CSV | Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| EN 61318:2008 | Live working - Conformity assessment applicable to tools, devices and equipment |
| IEC 61243-1:2003+AMD1:2009 CSV | Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
| EN 61477:2009/corrigendum:2010 | LIVE WORKING - MINIMUM REQUIREMENTS FOR THE UTILIZATION OF TOOLS, DEVICES AND EQUIPMENT |
| EN 50110-1:2013 | Operation of electrical installations - Part 1: General requirements |
| IEC 61318:2007 | Live working - Conformity assessment applicable to tools, devices and equipment |
| EN 61243-1:2005/A1:2010 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| EN 60071-1:2006/A1:2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| IEC 61230:2008 | Live working - Portable equipment for earthing or earthing and short-circuiting |
| EN 61235:1995 | Live working - Insulating hollow tubes for electrical purposes |
| EN 62193:2003 | Live working - Telescopic sticks and telescopic measuring sticks |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| EN 60068-2-32:1993 | Basic environmental testing procedures - Part 2: Tests - Test Ed: Free fall |
| IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| EN 60832:1996 | Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| EN 60855:1996 | Insulating foam-filled tubes and solid rods for live working |
| EN 50110-2:2010 | Operation of electrical installations - Part 2: National annexes |
| IEC 62193:2003 | Live working - Telescopic sticks and telescopic measuring sticks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.