I.S. EN 3545-001:2008
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2008
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Design
6 Definition drawing and masses
7 Contact arrangements
8 Tests
9 Quality assurance
10 Designation and marking
11 Delivery conditions
12 Packaging
13 Storage
Describes the technical requirements of rectangular connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from -55 degree C to 175 degree C.
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 3545-001:2008 | Identical |
| UNI EN 3545-001 : 2010 | Identical |
| NS EN 3545-001 : 2ED 2008 | Identical |
| NF EN 3545-001 : B2008 | Identical |
| BS EN 3545-001:2008 | Identical |
| NEN EN 3545-001 : 2008 | Identical |
| DIN EN 3545-001:2009-06 | Identical |
| NBN EN 3545-001 : 2008 | Identical |
| SN EN 3545-001 : 2008 | Identical |
| EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
| EN 2591-205:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B5: Housing (shell) electrical continuity |
| EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
| EN 3545-008:2006 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard |
| EN 2591-311:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
| EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
| EN 2591-421:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall |
| SAE AMS 1424 : 2016 | FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
| EN 2591-213:1997 | Aeropsace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
| EN 2591-418:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts) |
| EN 2591-425:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 425: Unwrapping capability, solderless wrapped connections |
| EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
| EN 2591-316:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-405:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 405: Axial load |
| EN 2591-308:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
| EN 2591-318:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance |
| EN 2591-401:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part D1: Acceleration, steady state |
| EN 2591-412:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 412: Contact insertion and extraction forces |
| EN 2591-414:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 414: Unmating of lanyard release connectors |
| EN 2591-203:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B3: Electrical continuity at microvolt level |
| EN 2591-408:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces |
| EN 2591-323:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 323: Thermal shock |
| EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
| EN 3155-008:2005 | Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
| EN 2591-322:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 322: Hermeticity |
| EN 2591-312:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-424:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections |
| EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
| EN 2591-216:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 216: Engagement depth of contacts |
| EN 4529-002:2006 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 002: Index of product standards |
| EN 2591-410:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 410: Insert retention in housing (axial) |
| EN 2591-320:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 320: Simulated solar radiation at ground level |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-420:2006 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories |
| EN 3155-071:2014 | Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard |
| EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
| EN 3155-070:2014 | Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard |
| EN 2591-427:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 427: Robustness of protective cover attachment |
| EN 2591-505:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 505: Contact protection effectiveness (scoop-proof) |
| EN 2591-206:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B6: Measurement of insulation resistance |
| PREN 3197 : 200P2 | AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS |
| EN 2591-317:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 317: Flammability |
| EN 2591-208:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B8: Temperature rise due to rated current |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| EN 2591-409:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 409: Contact retention in insert |
| EN 2591-313:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
| EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| EN 2591-506:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 506: Use of tools |
| EN 2591-407:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 407: Durability of contact retention system and seals |
| EN 2591-321:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 321: Damp heat, cyclic test |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| EN 3155-003:2005 | Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard |
| EN 2591-314:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 314: Immersion at low air pressure |
| MIL-PRF-7870 Revision E:2015 | LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) |
| EN 2591-413:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 413: Holding force of grounding spring system |
| EN 2591-309:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
| EN 2591-304:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
| EN 2591-411:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 411: Insert retention in housing (torsional) |
| EN 2591-419:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 419: Stability of male contacts in insert |
| EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
| EN 2591-302:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
| EN 2591-209:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B9: Current temperature derating |
| EN 2591-426:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 426: Contact retention system effectiveness |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| EN 2591-207:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B7: Voltage proof test |
| EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
| EN 2266-002:2005 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 002: General |
| EN 2591-324:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 324: Interfacial sealing |
| EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
| EN 3545-002:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-310:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
| EN 2591-404:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 404: Transverse load |
| EN 2591-303:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 303: Cold/low pressure and damp heat |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.