I.S. EN 3155-069:2009
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2009
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
4.1 Specific characteristics
4.2 Dimensions and mass
4.3 Marking by colour code
4.4 Material, surface treatment
4.5 Permissible cables
4.6 Stripping of cables and wiring method
4.7 Tooling
4.8 Tests
4.9 Gauge
5 Designation
6 Marking
7 Technical specification
Describes the required characteristics, tests and tooling applicable to size 16, female coaxial electrical contacts, type D, solder, class P, used in elements of connection according to EN 3155-002.
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 3155-069:2009 | Identical |
| EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
| EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
| EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
| EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| SAE AMS 1424 : 2016 | FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
| EN 2591-213:1997 | Aeropsace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
| EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| TR 6058 : 2011 | AEROSPACE SERIES - CABLE CODE IDENTIFICATION LIST |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
| EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
| MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
| SAE AS 39029/78 : 2013 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES 2 CONNECTORS) |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
| EN 2591-206:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B6: Measurement of insulation resistance |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
| MIL-PRF-7870 Revision E:2015 | LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) |
| EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
| EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
| EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
| EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| EN 3155-002:2011 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 2591-207:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B7: Voltage proof test |
| EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
| EN 3155-058:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R Product standard |
| EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| MIL-I-81969 Revision B:1982 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.