I.S. EN 3155-009:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 009: CONTACTS, ELECTRICAL, FEMALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD
Available format(s)
Hardcopy , PDF
Superseded date
09-08-2019
Superseded by
Language(s)
English
Published date
01-01-2009
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
4.1 Specific characteristics
4.2 Dimensions and mass
4.3 Marking by colour code
4.4 Material, surface treatment
4.5 Permissible cables
4.6 Tooling
4.6.1 Crimping tools
4.6.2 Insertion/Extraction tools
4.7 Cable stripping
4.8 Tests
4.9 Gauges
5 Designation
6 Marking
7 Technical specification
Describes the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 3155-009:2009 | Identical |
| NS EN 3155-009 : 2009 | Identical |
| DIN EN 3155-009:2009-06 | Identical |
| NEN EN 3155-009 : 2009 | Identical |
| SN EN 3155-009 : 2009 | Identical |
| BS EN 3155-009:2009 | Identical |
| NBN EN 3155-009 : 2009 | Identical |
| NF EN 3155-009 : 2009 | Identical |
| UNI EN 3155-009 : 2010 | Identical |
| ONORM EN 3155-009 : 2009 | Identical |
| EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
| EN 3155-001:2016 | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification |
| EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
| EN 2591-418:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts) |
| EN 2591-425:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 425: Unwrapping capability, solderless wrapped connections |
| EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-220:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
| EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
| EN 3155-008:2005 | Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| SAE AS 39029/58 : 2015 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-24308, MIL-DTL-38999 SERIES 1, 2, 3, AND 4, AND MIL-DTL-55302/69 AND MIL-DTL-83733 CONNECTORS) |
| EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2083:2001 | Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard |
| EN 2591-424:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections |
| EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
| EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
| ISO 8843:2005 | Aircraft — Crimp-removable contacts for electrical connectors — Identification system |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| SAE AS 39029/56 : 2011 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-38999 SERIES 1, 3 AND 4 CONNECTORS) |
| EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| MIL-DTL-22520 Revision G:1997 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
| EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
| EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
| EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| EN 3155-002:2011 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| SAE AS 39029 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
| EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
| EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
| MIL-I-81969 Revision B:1982 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.