I.S. EN 1873:2014
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
Available format(s)
Hardcopy , PDF
Withdrawn date
03-06-2016
Language(s)
English
Published date
05-31-2014
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements
6 Testing and classification
7 Assessment and verification of constancy of performance - AVCP
8 Designation and marking
Annex A (informative) - Guidelines for safety, application,
use and maintenance
Annex B (normative) - Alternative test method for the determination
of light transmission
Annex C (normative) - Test method for air permeability
Annex D (normative) - Determination of thermal transmittance
of rooflight
Annex E (normative) - Reaction to fire test
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU
Construction Products Regulation
Bibliography
Pertains to rooflights with a rectangular or circular ground plan, with an opening span (width) or diameter not larger than 2,5 m and an opening length not larger than 3,0 m in roof pitches up to 25 degrees.
| DevelopmentNote |
2014 Edition Re-Issued in March 2016 & incorporates AMD 1 2016. (04/2016)
|
| DocumentType |
Standard
|
| Pages |
84
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NBN EN 1873 : 2014 + A1 2016 | Identical |
| BS EN 1873 : 2014 | Identical |
| EN 1873:2014+A1:2016 | Identical |
| UNE-EN 1873:2015 | Identical |
| NF EN 1873 : 2014 + A1 2016 | Identical |
| NEN EN 1873 : 2014 + A1 2016 | Identical |
| NS EN 1873 : 2014 + A1 2016 | Identical |
| SN EN 1873 : 2014 + A1 2016 | Identical |
| UNI EN 1873 : 2014 | Identical |
| DIN EN 1873:2016-07 | Identical |
| S.R. 82:2017 | SLATING AND TILING - CODE OF PRACTICE |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO 10211:2017 | Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| EN ISO 11664-2:2011 | Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) |
| ISO 12017:1995 | Plastics Poly(methyl methacrylate) double- and triple-skin sheets Test methods |
| ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
| EN 1013:2012+A1:2014 | Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| EN 1026:2016 | Windows and doors - Air permeability - Test method |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| EN 12101-2:2017 | Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN ISO 10140-4:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010) |
| ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
| ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN ISO 11664-1:2011 | Colorimetry - Part 1: CIE standard colorimetric observers (ISO 11664-1:2007) |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| ISO 10077-2:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| ISO 10140-4:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN ISO 10077-2:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017) |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| EN ISO 14683:2017 | Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017) |
| ISO 11664-1:2007 | Colorimetry Part 1: CIE standard colorimetric observers |
| EN ISO 13468-2:2006 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| ISO 12567-2:2005 | Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 2: Roof windows and other projecting windows |
| EN ISO 10211:2017 | Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017) |
| EN 12412-2:2003 | Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames |
| EN 674:2011 | Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method |
| ISO 13468-2:1999 | Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument |
| EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 675:2011 | Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| CEN/TS 1187:2012 | Test methods for external fire exposure to roofs |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
| EN ISO 12017:1996 | Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995) |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| EN 795:2012 | Personal fall protection equipment - Anchor devices |
| EN ISO 13468-1:1996 | Plastics - Determination of total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996) |
| EN ISO 12567-2:2005 | Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005) |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ISO 14683:2017 | Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default values |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.