I.S. EN 16351:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
Hardcopy , PDF
03-24-2021
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Components and product characteristics, testing
and assessment methods
6 Assessment and Verification of Constancy of
Performance (AVCP)
7 Marking and labelling
Annex A (normative) - Release of Formaldehyde
Annex B (normative) - Additional test methods and
requirements for adhesives
Annex C (normative) - Delamination test of glue lines
between layers
Annex D (normative) - Shear tests
Annex E (normative) - Tests with laminations with or
without finger joints (including compliance criteria)
Annex F (normative) - Determination of strength, stiffness
and density properties of cross laminated timber
Annex G (normative) - Measurement of moisture content
Annex H (normative) - Separation tests with finger joints
in laminations produced with contact-free application
of adhesive
Annex I (normative) - Minimum production requirements
Annex ZA (informative) - Clauses of this European Standard
addressing the requirements of the EU Construction
Products Regulation
Bibliography
Defines provisions regarding the performance characteristics for straight and curved structural cross laminated timber (X-Lam) both without and with large finger joints as a material for the manufacture of structural elements to be used in buildings and bridges.
| DocumentType |
Standard
|
| Pages |
108
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 16351:2015 | Identical |
| EN 13183-3:2005 | Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method |
| EN 13353:2008+A1:2011 | Solid wood panels (SWP) - Requirements |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 302-5:2013 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
| EN 350-1:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood |
| EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| EN 302-2:2017 | Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination |
| EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
| EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 302-4:2013 | Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
| EN 302-3:2017 | Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| EN 408:2010+A1:2012 | Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
| EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| EN 14374:2004 | Timber structures - Structural laminated veneer lumber - Requirements |
| EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 338:2016 | Structural timber - Strength classes |
| EN 14358:2016 | Timber structures - Calculation and verification of characteristic values |
| EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| EN 15228:2009 | Structural timber - Structural timber preservative treated against biological attack |
| EN 384:2016 | Structural timber - Determination of characteristic values of mechanical properties and density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.