I.S. EN 15940:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
Available format(s)
Hardcopy , PDF
Superseded date
02-04-2020
Superseded by
Published date
07-17-2016
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Sampling
4 Pump marking
5 Requirements and test methods
Annex A (informative) Seizure protection
Annex B (normative) Details of interlaboratory test programme
Annex C (normative) Details of HPLC procedure
Annex D (normative) Measurements and constants for paraffinic fuel products and components
Bibliography
Specifies requirements and test methods for marketed and delivered paraffinic diesel fuel containing a level of up to 7,0 % (V/V) fatty acid methyl ester (FAME).
| Committee |
CEN/TC 19
|
| DevelopmentNote |
Supersedes SR CEN/TS 15940. (07/2016)
|
| DocumentType |
Test Method
|
| Pages |
40
|
| ProductNote |
CSV VERSION AVAILABLE FOR THIS STANDARD NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. THIS STANDARD ALSO REFERS TO EN 14214:2012+A1:2014,EN ISO 2719:2002,EN ISO 3924:2010,EN ISO 5165:1998,CEN/TR 16389,2009/28/EC:2009,98/70/EC:1998,2003/17/EC:2003,2009/30/EC:2009,2014/77/EU:2014,API MPMS Chapter 11,OIML R 117,EN 590,
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 15940:2016+A1:2018+AC:2019 | Identical |
| EN 15940:2016 | Identical |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 13759:1996 | Petroleum products — Determination of alkyl nitrate in diesel fuels — Spectrometric method |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| ISO 5165:1998 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| OIML R 63 : 1994 | PETROLEUM MEASUREMENT TABLES |
| EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| OIML R 120 : 2010 | STANDARD CAPACITY MEASURES FOR TESTING MEASURING SYSTEMS OR LIQUIDS OTHER THAN WATER |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| EN ISO 10370:2014 | Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014) |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| EN ISO 12205:1996 | Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
| PREN 16906 : DRAFT 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| ISO 10370:2014 | Petroleum products — Determination of carbon residue — Micro method |
| EN ISO 1042:1999 | Laboratory glassware - One-mark volumetric flasks (ISO 1042:1998) |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| EN ISO 3924:2016 | Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016) |
| ISO 20884:2011 | Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry |
| PREN 16942 : DRAFT 2016 | FUELS - IDENTIFICATION OF VEHICLE COMPATIBILITY - GRAPHICAL EXPRESSION FOR CONSUMER INFORMATION |
| ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| EN ISO 12937:2000 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
| EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| EN 23015:1994 | Petroleum products - Determination of cloud point (ISO 3015:1992) |
| ISO 91-1:1992 | Petroleum measurement tables Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| EN ISO 13759:1996 | Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
| ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
| EN ISO 20884:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011) |
| EN ISO 2160:1998 | Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
| ISO 3015:1992 | Petroleum products — Determination of cloud point |
| EN ISO 4259:2006 | Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
| ISO 3924:2016 | Petroleum products Determination of boiling range distribution Gas chromatography method |
| EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.