I.S. EN 15564:2008
Current
The latest, up-to-date edition.
PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Constituent materials
4.2.1 Aggregates
4.2.2 Filler
4.2.3 Resin
4.3 Other materials
4.4 Properties of resin-bound concrete
4.4.1 General
4.4.2 Apparent density, water absorption and
water permeability
4.4.3 Strength
4.4.4 Surface hardness
4.4.5 Slipperiness behaviour
4.4.6 Abrasion resistance
4.4.7 Thermal shock resistance
4.4.8 Impact resistance
4.4.9 Linear thermal expansion coefficient
4.4.10 Chemical resistance
4.4.11 Freeze and thaw resistance
4.4.12 Thermal conductivity
4.4.13 Reaction to fire
5 Tests
5.1 Constituent materials
5.1.1 Aggregates
5.1.2 Filler
5.1.3 Resin
5.2 Test specimens
5.2.1 General
5.2.2 Cast test specimens
5.3 Apparent density, water absorption and
water permeability
5.4 Strength
5.5 Surface hardness
5.6 Slipperiness behaviour
5.7 Abrasion resistance
5.8 Thermal shock resistance
5.9 Impact resistance
5.10 Linear thermal expansion coefficient
5.11 Chemical resistance
5.12 Freeze and thaw resistance
5.13 Thermal conductivity
5.14 Reaction to fire
6 Evaluation of conformity
6.1 General
6.2 Initial type tests
6.3 Factory production control
6.3.1 General
6.3.2 Organisation
6.3.3 Control system
6.3.4 Document control
6.3.5 Process control
6.3.6 Inspection and testing
6.3.7 Non-conforming products
6.3.8 Indirect or alternative test method
Annex A (normative) - Determination of the viscosity
of the resin
A.1 Aim
A.2 Method
A.3 Apparatus
A.4 Procedure
A.4.1 Preliminary operations
A.4.2 Test procedure
A.5 Results
Annex B (normative) - Determination of the reactivity
of the resin
B.1 Aim
B.2 Method
B.3 Apparatus
B.4 Procedure
B.5 Results
Annex C (normative) - Determination of the surface hardness
C.1 Aim
C.2 Method
C.3 Apparatus
C.4 Procedure
C.4.1 Calibration of the hardness tester
C.4.2 Test procedure
C.5 Results
Bibliography
Describes common requirements for resin-bound concrete used in the fabrication of precast concrete products.
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 15564:2008 | Identical |
| EN 14617-4:2012 | Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance |
| EN 14617-11:2005 | Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient |
| EN 14617-2:2016 | Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending) |
| ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
| EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
| EN 933-10:2009 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
| EN 14617-9:2005 | Agglomerated stone - Test methods - Part 9: Determination of impact resistance |
| EN 14618:2009 | Agglomerated stone - Terminology and classification |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN ISO 9371 : 1995 | PLASTICS - PHENOLIC RESINS IN THE LIQUID STATE OR IN SOLUTION - DETERMINATION OF VISCOSITY |
| ISO 9371:1990 | Plastics Phenolic resins in the liquid state or in solution Determination of viscosity |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 14617-15:2005 | Agglomerated stone - Test methods - Part 15: Determination of compressive strength |
| EN 14889-2:2006 | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| EN 14889-1:2006 | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 14231:2003 | Natural stone test methods - Determination of the slip resistance by means of the pendulum tester |
| EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| EN ISO 584:1997 | Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982) |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 14617-5:2012 | Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance |
| EN 14617-6:2012 | Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance |
| ISO 584:1982 | Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method) |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN 14617-1:2013 | Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption |
| EN 14617-10:2012 | Agglomerated stone - Test methods - Part 10: Determination of chemical resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.