I.S. EN 15423:2008
Current
The latest, up-to-date edition.
VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Air distribution system
4.1 General requirements
4.2 Design of air distribution systems
4.3 Installation
5 Requirements for components intended for fire precautions
5.1 General
5.2 Inlet/outlet louvres
5.3 Fans
5.4 Air control dampers
5.5 Duct
5.6 Fire dampers and smoke control dampers
5.7 Air terminal devices
5.8 Anchors and supports
5.9 Duct fittings
5.10 Control panels
5.11 Cables and connections
5.12 Air handling units
5.13 Air filters
5.14 Sound attenuators
5.15 Heat exchangers
6 Commissioning and maintenance of air distribution systems
7 Marking, labelling and product information
Annex A (informative) Checklist for components
Annex B (informative) Table of components/characteristics
European Standards
Annex C (informative) Maintenance for fire dampers and smoke
control dampers
Bibliography
Presents guidance for system designers, installers, commissioners and maintenance teams on the incorporation of protective measures for air distribution systems including dual purpose systems for smoke and heat exhaust systems within buildings, to prevent the initiation and the spread of fire, smoke and other byproducts of combustion.
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 15423:2008 | Identical |
| EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| EN 1505:1997 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions |
| EN 12238:2001 | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN 13403:2003 | Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards |
| EN 13180:2001 | Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| EN 13501-4:2016 | Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| EN 1366-1:2014 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 1506:2007 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| EN 1366-9:2008 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
| EN 12236:2002 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
| EN 1366-8:2004 | Fire resistance tests for service installations - Part 8: Smoke extraction ducts |
| EN 13501-3:2005+A1:2009 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
| EN 12239:2001 | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications |
| EN 1363-1:2012 | Fire resistance tests - Part 1: General Requirements |
| EN 1366-2:2015 | Fire resistance tests for service installations - Part 2: Fire dampers |
| EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| ISO 10294-4:2001 | Fire resistance tests Fire dampers for air distribution systems Part 4: Test of thermal release mechanism |
| EN 12589:2001 | Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 13030:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.