I.S. EN 15232-1:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ENERGY PERFORMANCE OF BUILDINGS - ENERGY PERFORMANCE OF BUILDINGS - PART 1: IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - MODULES M10-4, 5, 6, 7, 8, 9, 10
Hardcopy , PDF
04-09-2022
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols, subscripts and abbreviations
5 Description of the method
6 Method 1 - Detailed calculation procedure
of the BAC contribution to the energy
performance of buildings (Detailed method)
7 Method 2 - Factor based calculation procedure
of the BAC impact on the energy performance
of buildings (BAC factor method)
8 Simplified input data correlations
9 Quality control
10 Compliance check
Annex A (informative) - BAC efficiency factors
Annex B (informative) - Minimum BAC function type requirements
Annex C (informative) - Determination of the BAC efficiency factors
Annex D (informative) - Examples of how to use the BAC function
list of EN ISO 16484-3 to describe functions from this
European Standard
Annex E (informative) - Applying BAC for EMS specified in
EN ISO 50001
Annex F (informative) - Maintain BAC energy efficiency
Annex G (informative) - Control accuracy
Bibliography
Describes a structured list of control, building automation and technical building management functions which contribute to the energy performance of buildings; functions have been categorized and structured according to building disciplines and so called Building automation and control (BAC).
| DevelopmentNote |
Supersedes I.S. EN 15232. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
112
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 15232-1:2017 | Identical |
| CEN/TS 16629:2014 | Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards |
| EN 15193-1:2017 | Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9 |
| ISO 16484-5:2017 | Building automation and control systems (BACS) — Part 5: Data communication protocol |
| CEN/TS 16628:2014 | Energy Performance of Buildings - Basic Principles for the set of EPB standards |
| EN 16798-13:2017 | Energy performance of buildings - Ventilation for buildings - Part 13: Calculation of cooling systems (Module M4-8) - Generation |
| CEN ISO/TR 52000-2:2017 | Energy performance of buildings - Overarching EPB assessment - Part 2: Explanation and justification of ISO 52000-1 (ISO/TR 52000-2:2017) |
| EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| ISO 9488:1999 | Solar energy Vocabulary |
| EN 16798-9:2017 | Energy performance of buildings - Ventilation for buildings - Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - General |
| IEC 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
| ISO 52016-1:2017 | Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures |
| ISO 52000-1:2017 | Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures |
| EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
| ISO 16484-1:2010 | Building automation and control systems (BACS) — Part 1: Project specification and implementation |
| ISO 50001:2011 | Energy management systems Requirements with guidance for use |
| EN 15500-1:2017 | Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 |
| EN 16798-15:2017 | Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage |
| EN 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| EN 15316-4-7:2008 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems |
| EN ISO 16484-5:2017 | Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2017) |
| EN ISO 16484-1:2010 | Building automation and control systems (BACS) - Part 1: Project specification and implementation (ISO 16484-1:2010) |
| ISO 16484-3:2005 | Building automation and control systems (BACS) — Part 3: Functions |
| EN ISO 9488:1999 | Solar energy - Vocabulary (ISO 9488:1999) |
| EN 15232:2012 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
| EN 15316-2:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 |
| EN ISO 52000-1:2017 | Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017) |
| PREN 16798-3 : DRAFT 2014 | ENERGY PERFORMANCE OF BUILDINGS - PART 3: VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
| CEN/TR 15232-2:2016 | Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10 |
| EN ISO 16484-3:2005 | Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005) |
| EN 12098-3:2017 | Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 |
| EN 15243:2007 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| EN 15255:2007 | Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 16798-7:2017 | Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) |
| IEC 60675:1994+AMD1:1998 CSV | Household electric direct-acting room heaters - Methods for measuring performance |
| EN 16798-5-1:2017 | Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation |
| EN ISO 50001:2011 | Energy management systems - Requirements with guidance for use (ISO 50001:2011) |
| EN ISO 52016-1:2017 | Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017) |
| EN 15378-1:2017 | Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
| EN 60675:1995/A1:1998 | HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
| EN 15217:2007 | Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings |
| EN ISO 16484-2:2004 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
| EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
| EN 15316-4-5:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.