I.S. EN 14893:2014
Current
Current
The latest, up-to-date edition.
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2014
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Design
6 Workmanship and manufacture
7 Initial inspection and testing
8 Surface treatment and finishing
9 Marking
10 Conformity assessment
11 Design type testing
12 Records and documentation
Annex A (informative) - Guidance on selection of
material grades
Annex B (normative) - Tolerances on drums
Annex C (normative) - Hydraulic pressure test
Annex D (normative) - Imperfections of welded joints
Annex E (normative) - Design formulae for drums
Annex F (informative) - Measurement of shell peaking
Annex G (informative) - Examples of welded joints
Annex H (informative) - Environmental checklist
Bibliography
Defines the minimum requirements for the material, design, construction, workmanship, equipping, inspection and testing at manufacture of transportable, refillable welded steel pressure drums of volumes over 150 l up to and including 1000 l for Liquefied Petroleum Gases (LPG).
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 14893 : 2014 | Identical |
| NEN EN 14893 : 2014 | Identical |
| DIN EN 14893:2014-09 | Identical |
| BS EN 14893:2014 | Identical |
| EN 14893:2014 | Identical |
| NS EN 14893 : 2014 | Identical |
| NBN EN 14893 : 2014 | Identical |
| NF EN 14893 : 2014 | Identical |
| SN EN 14893 : 2014 | Identical |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
| EN 13175:2014 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
| ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
| EN ISO 19232-3:2013 | Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013) |
| EN 1708-1:2010 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| ISO 14024:1999 | Environmental labels and declarations Type I environmental labelling Principles and procedures |
| EN ISO 14171:2016 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016) |
| ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN 13799:2012 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| EN ISO 9016:2012 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012) |
| EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| EN ISO 5178:2011 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001) |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| EN 10028-5:2017 | Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| EN ISO 17639:2013 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
| ISO 14171:2016 | Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification |
| ISO 19232-3:2013 | Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes |
| EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 15995:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Manually operated |
| EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
| ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
| ISO 17632:2015 | Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification |
| EN ISO 11114-2:2013 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9162:2013 | Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications |
| CEN ISO/TR 15608:2017 | Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
| EN ISO 17632:2015 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| ISO 9016:2012 | Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination |
| ISO 5178:2001 | Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints |
| EN 14894:2013 | LPG equipment and accessories - Cylinder and drum marking |
| ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN 837-2:1997 | Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
| EN ISO 636:2017 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) |
| EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN 14717:2005 | Welding and allied processes - Environmental check list |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN ISO 17638:2016 | Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
| EN ISO 15995:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006) |
| ISO 636:2017 | Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification |
| ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.