I.S. EN 1462:2004
Current
The latest, up-to-date edition.
BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING
Hardcopy , PDF
English
01-01-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Resistance to corrosion
6 Design
6.1 General
6.2 Load bearing capacity
6.3 Holes for fastenings
7 Designation of gutter brackets for ordering purposes
8 Marking
9 Production control
Annex A (normative) Test method to determine the corrosion
resistance of plastic-coated gutter brackets
A.1 Principle
A.2 Apparatus
A.3 Procedure
Annex B (normative) Test method to determine the load
bearing capacity of gutter brackets
B.1 Principle
B.2 Apparatus
B.3 Procedure
Provides the requirements for rafter and fascia board brackets intended to support eaves gutters conforming to EN 607 or EN 612.
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 1462:2004-12 | Identical |
| UNI EN 1462 : 2005 | Identical |
| SN EN 1462 : 1997 | Identical |
| EN 1462:2004 | Identical |
| UNE-EN 1462:2006 | Identical |
| BS EN 1462:2004 | Identical |
| NBN EN 1462 : 2004 | Identical |
| NF EN 1462 : 2005 | Identical |
| NEN EN 1462 : 2004 | Identical |
| NS EN 1462 : 2ED 2004 | Identical |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN 612:2005 | Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet |
| EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN 1676:2010 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| EN 485-3:2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| EN 607:2004 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.