I.S. EN 14582:2016
Current
The latest, up-to-date edition.
CHARACTERIZATION OF WASTE - HALOGEN AND SULFUR CONTENT - OXYGEN COMBUSTION IN CLOSED SYSTEMS AND DETERMINATION METHODS
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Interferences
6 Hazards
7 Reagents and control mixtures
8 Sample conservation and pretreatment of test portion
9 Equipment
10 Procedure
11 Recommended methods of determination
12 Control measurements
13 Evaluation
14 Test report
Annex A (informative) - Performance characteristics
Annex B (informative) - Oxygen flask combustion by
Schoeniger
Annex C (informative) - Recovery yields obtained for
control mixtures with different absorption
solutions and analytical techniques
Annex D (informative) - Examples of possible control
substances
Annex E (informative) - Additional results of
inter-laboratory tests
Annex F (informative) - Summary of general
requirements and recommendations
Annex G (informative) - Additional validation data
Bibliography
This standard specifies a combustion method for the determination of halogen and sulfur contents in materials by combustion in a closed system containing oxygen (calorimetric bomb), and the subsequent analysis of the combustion product using different analytical techniques.
| Committee |
TC 292
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 14582 : 2007 | Identical |
| UNE-EN 14582:2016 | Identical |
| NS EN 14582 : 2007 | Identical |
| EN 14582:2016 | Identical |
| NF EN 14582 : 2016 | Identical |
| BS EN 14582:2007 | Identical |
| NEN EN 14582 : 2016 | Identical |
| DIN EN 14582:2015-04 (Draft) | Identical |
| SN EN 14582:2016 | Identical |
| UNI EN 14582 : 2007 | Identical |
| DIN EN 14582:2016-12 | Identical |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN ISO 10304-3:1997 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997) |
| ASTM D 808 : 2016 : REDLINE | Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) |
| ISO 10304-3:1997 | Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate |
| EN 14346:2006 | Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
| ISO 9297:1989 | Water quality Determination of chloride Silver nitrate titration with chromate indicator (Mohr's method) |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| ISO 10304-2:1995 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water |
| ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| ASTM E 442 : 1991 | Test Method for Chlorine, Bromine, or Iodine in Organic Compounds by Oxygen Flask Combustion (Withdrawn 1997) |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.