I.S. EN 1455-1:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
Hardcopy , PDF
07-10-2023
English
01-01-1999
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols
3.3 Abbreviations
4 Material
4.1 ABS-compound
4.2 Reprocessable and recyclable material
4.3 Sealing ring retaining means
4.4 Fire behaviour
5 General characteristics
5.1 Appearance
5.2 Colour
6 Geometrical characteristics
6.1 General
6.2 Dimensions of pipes
6.3 Dimensions of fittings
6.4 Dimensions of sockets and pipe ends
6.5 Types of fittings
7 Mechanical characteristics
7.1 General characteristics
7.2 Additional characteristics
8 Physical characteristics
8.1 Physical characteristics of pipes
8.2 Physical characteristics of fittings
9 Performance requirements
10 Requirements for application area "BD"
10.1 General
10.2 Material characteristics
10.3 Mechanical characteristics
11 Sealing rings
12 Adhesives
13 Marking
13.1 General
13.2 Minimum required marking of pipes
13.3 Minimum required marking of fittings
14 Installation of piping system
Annex A (informative) General characteristics of ABS pipes
and fittings
Defines requirements for pipes, fittings and the system of acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester(asa) solid-wall piping systems for soil and waste discharge (low and high temperature).
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 1455-1 : 1ED 1999 | Identical |
| EN 1455-1:1999 | Identical |
| DIN EN 1455-1:1999-12 | Identical |
| ONORM EN 1455-1 : 2015 | Identical |
| NBN EN 1455-1 : 2000 | Identical |
| NEN EN 1455-1 : 2000 | Identical |
| UNI EN 1455-1 : 2002 | Identical |
| BS EN 1455-1:2000 | Identical |
| NF EN 1455-1 : 2000 | Identical |
| SN EN 1455-1 : 1999 | Identical |
| UNE-EN 1455-1:2000 | Identical |
| EN 1277:2003 | Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
| ISO/TR 10358:1993 | Plastics pipes and fittings Combined chemical-resistance classification table |
| ISO 8361-1:1991 | Thermoplastics pipes and fittings — Water absorption — Part 1: General test method |
| EN 1411:1996 | Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method |
| ISO 265-1:1988 | Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U) |
| EN 1055:1996 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
| ISO/TR 7620:2005 | Rubber materials — Chemical resistance |
| EN 743 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF THE LONGITUDINAL REVERSION |
| EN 763 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING |
| EN 476:2011 | General requirements for components used in drains and sewers |
| EN 921:1994/AC:1995 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 7246:1984 | Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) General specification for moulding and extrusion materials |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| EN ISO 9969:2016 | Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
| EN 744:1995 | Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
| ISO 7245:1984 | Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) General specification for moulding and extrusion materials |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| EN 1053:1995 | Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness |
| ISO 13967:2009 | Thermoplastics fittings Determination of ring stiffness |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN 1054:1995 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.