I.S. EN 14439:2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
CRANES - SAFETY - TOWER CRANES
Hardcopy , PDF
07-17-2009
English
02-07-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 General
5.2 Design requirements on the load bearing structure
5.3 Design requirements for equipment
5.4 Design requirements for health and safety
5.5 Noise reduction
6 Verification of the safety requirements and/or protective
measures
6.1 General
6.2 Method of verification
6.3 Fitness for purpose
6.4 Noise measurement
7 Information for use
7.1 General
7.2 Instructions handbook
7.3 Marking
Annex A (normative) Stability requirements
Annex B (informative) Requirements for the provision of
anti-collision on tower crane
Annex C (normative) Outside indicators on the crane
Annex D (normative) Verification of the safety requirements
and/or protective measures
Annex E (normative) Noise test code
Annex F (normative) Climbing system
Annex G (informative) Marking - Example of layout
Annex H (informative) Selection of a suitable set of crane
standards for a given application
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU Directive
98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU Directive
2006/42/EC
Bibliography
Defines safety requirements for tower cranes.
| DevelopmentNote |
2006 Edition Re-issued in July 2009 & incorporates AMD 2 2009. (09/2009)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| SN EN 14439 : 2007 + A2 2009 | Identical |
| DIN EN 14439:2010-03 | Identical |
| EN 14439:2006+A2:2009 | Identical |
| UNI EN 14439 : 2009 | Identical |
| BS EN 14439 : 2006 | Identical |
| NS EN 14439 : 2006 + A2 2009 | Identical |
| NF EN 14439 : 2007 + A2 2009 | Identical |
| NBN EN 14439 : 2007 + A2 2009 | Identical |
| NEN EN 14439 : 2007 + A2 2009 | Identical |
| I.S. 361:2013 | CODE OF PRACTICE FOR THE SAFE USE OF TOWER CRANES AND SELF-ERECTING CRANES |
| EN 13557:2003+A2:2008 | Cranes - Controls and control stations |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 4306-1:2007 | Cranes — Vocabulary — Part 1: General |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 4310:2009 | Cranes — Test code and procedures |
| ISO 7752-3:2013 | Cranes — Control layout and characteristics — Part 3: Tower cranes |
| 1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
| EN 13135-2:2004+A1:2010 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| ISO 13200:1995 | Cranes — Safety signs and hazard pictorials — General principles |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 13586:2004+A1:2008 | Cranes - Access |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN 12644-1:2001+A1:2008 | Cranes - Information for use and testing - Part 1: Instructions |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| EN 13135-1:2003+A1:2010 | Cranes - Equipment - Part 1: Electrotechnical equipment |
| EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 4306-3:2016 | Cranes Vocabulary Part 3: Tower cranes |
| ISO 8566-3:2010 | Cranes Cabins and control stations Part 3: Tower cranes |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.