I.S. EN 14227-11:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 11: SOIL TREATED BY LIME
Hardcopy , PDF
11-22-2015
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Constituents
4.1 Lime
4.1.1 Quick lime
4.1.2 Hydrated lime
4.2 Water
4.3 Soil
4.3.1 Soil for improvement by lime
4.3.2 Soil for stabilization by lime
5 Laboratory performance for soil improved by lime
5.1 General
5.2 Immediate bearing index
5.3 Moisture condition value
5.4 Degree of compaction
5.5 Swelling
6 Laboratory performance for soil stabilized by lime
6.1 Degree of pulverization
6.2 Water content
6.3 Immediate bearing index
6.4 Moisture condition value
6.5 Mechanical performance
6.5.1 General
6.5.2 California bearing ratio
6.5.3 Compressive
6.6 Swelling
6.6.1 General
6.7 Frost resistance
7 Production control
8 Designation and description
9 Marking and labelling
Annex A (informative) Grading and plasticity guidance for
soil for stabilization
Annex B (informative) Production control for hydraulically
treated mixtures
B.1 General
B.2 Quality Manual
B.3 Organization
B.3.1 Responsibility and authority
B.3.2 Management representative
B.3.3 Internal audits
B.3.4 Management review
B.3.5 Sub-contract services
B.3.6 Records
B.3.7 Training
B.4 Control procedures
B.4.1 Production management
B.4.2 Composition of the mixture
B.4.3 Constituents
B.4.4 Process control
B.4.5 Inspection, calibration and control of
process equipment
B.4.6 Handling and delivery
B.5 Inspection and testing of constituents and mixtures
during production
B.5.1 General
B.5.2 Characteristics that require control during
production
B.5.3 Frequency of sampling the mixture
B.6 Inspection and testing equipment
B.6.1 General
B.6.2 Measuring and testing equipment
B.6.3 Measuring and testing equipment in the process
B.6.4 Measuring and testing equipment in laboratory
B.7 Non-conformity
B.7.1 General
B.7.2 Non-conformity of constituents
B.7.3 Non-conformity of the mixture
Applies to the treatment with lime of natural soils and other materials for roads, airfields and other trafficked areas and specifies the requirements for their constituents, composition and laboratory performance classification.
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NBN EN 14227-11 : 2006 | Identical |
BS EN 14227-11:2006 | Identical |
EN 14227-11:2006 | Identical |
NS EN 14227-11 : 1ED 2006 | Identical |
NEN EN 14227-11 : 2006 | Identical |
UNI EN 14227-11 : 2006 | Identical |
DIN EN 14227-11:2006-08 | Identical |
NF EN 14227-11 : 2006 | Identical |
UNE-EN 14227-11:2007 | Identical |
EN 459-2:2010 | Building lime - Part 2: Test methods |
EN 13286-49:2004 | Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder |
EN 459-1:2015 | Building lime - Part 1: Definitions, specifications and conformity criteria |
EN 13286-47:2012 | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
EN 13286-46:2003 | Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value |
EN 13286-41:2003 | Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures |
EN 13286-50:2004 | Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction |
EN 13286-48:2005 | Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.