I.S. EN 13830:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CURTAIN WALLING - PRODUCT STANDARD
Available format(s)
Hardcopy , PDF
Superseded date
07-01-2020
Superseded by
Language(s)
English
Published date
01-01-2015
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Product characteristics
5 Testing, assessment and sampling methods
6 Assessment and verification of constancy
of performance (AVCP)
7 Marking, labeling
Annex A (informative) - Maintenance
Annex B (informative) - Equipotential bonding
conditions
Annex C (informative) - Resistance to actions:
guidance on the use of Eurocodes
Annex D (normative) - Seismic resistance
Annex E (normative) - Selection, preparation,
mounting and fixing of test specimen for
reaction to fire tests of curtain walling
and field of direct application
Annex F (normative) - Characteristics and range
of direct application
Annex G (informative) - Characteristics and
performances of curtain walling kit
Annex H (informative) - Interchangeability between
characteristics and components
Annex I (informative) - Basic approach to durability
Annex ZA (informative) - Clauses of this standard
addressing the provisions of the EU
Construction Product Regulation
Bibliography
Defines requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 13830:2016 | Identical |
| NBN EN 13830 : 2015 | Identical |
| SN EN 13830 : 2015 | Identical |
| EN 13830:2015 | Identical |
| NF EN 13830 : 2015 | Identical |
| BS EN 13830:2015 | Identical |
| UNI EN 13830 : 2005 | Identical |
| NS EN 13830 : 2003 | Identical |
| NEN EN 13830 : 2015 | Identical |
| ONORM EN 13830 : 2015 | Identical |
| EN 13051:2001 | Curtain Walling - Watertightness - Site test |
| EN 13022-1:2014 | Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing |
| EN 13168:2012+A1:2015 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
| EN 12153:2000 | Curtain walling - Air permeability - Test method |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 13116:2001 | Curtain walling - Resistance to wind load - Performance requirements |
| ISO 9047:2001 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at variable temperatures |
| EN 13050:2011 | Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray |
| ISO 10848-2:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence |
| ISO 10848-1:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document |
| ISO 13788:2012 | Hygrothermal performance of building components and building elements — Internal surface temperature to avoid critical surface humidity and interstitial condensation — Calculation methods |
| EN 1364-3:2014 | Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly) |
| ISO 12631:2017 | Thermal performance of curtain walling — Calculation of thermal transmittance |
| EN 1096-4:2004 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard |
| EN ISO 9046:2004 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002) |
| ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN 13164:2012+A1:2015 | Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN ISO 10140-4:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010) |
| ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
| ISO 10590:2005 | Building construction Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water |
| EN ISO 12631:2017 | Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017) |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| EN 13166:2012+A2:2016 | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| ISO 11600:2002 | Building construction Jointing products Classification and requirements for sealants |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| ISO 10140-4:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
| EN 14019:2016 | Curtain Walling - Impact resistance - Performance requirements |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 12365-1:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification |
| EN ISO 10591:2005 | Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 15651-1:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
| EN 1279-3:2002 | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
| EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
| EN 13162:2012+A1:2015 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| ISO 12567-1:2010 | Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doors |
| EN 13170:2012+A1:2015 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| EN 1279-4:2002 | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
| EN ISO 10848-1:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017) |
| EN ISO 10590:2005 | Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) |
| EN 12412-2:2003 | Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames |
| EN 12365-4:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method |
| EN 13165:2012+A2:2016 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification |
| EN 1279-5:2005+A2:2010 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
| EN 1364-4:2014 | Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration |
| EN 12155:2000 | Curtain walling - Watertightness - Laboratory test under static pressure |
| EN 13171:2012+A1:2015 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| EN 12179:2000 | Curtain walling - Resistance to wind load - Test method |
| EN 13167:2012+A1:2015 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
| EN 1279-2:2002 | Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
| ISO 10591:2005 | Building construction Sealants Determination of adhesion/cohesion properties of sealants after immersion in water |
| EN 13119:2016 | Curtain walling - Terminology |
| ISO 8340:2005 | Building construction Sealants Determination of tensile properties at maintained extension |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| EN 13163:2012+A2:2016 | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification |
| ISO 9046:2002 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperature |
| EN ISO 13788:2012 | Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012, Corrected version 2020-05) |
| ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
| ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
| EN ISO 8339:2005 | Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005) |
| EN 1096-3:2012 | Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings |
| ISO 8339:2005 | Building construction Sealants Determination of tensile properties (Extension to break) |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN ISO 8340:2005 | Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005) |
| EN 13169:2012+A1:2015 | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification |
| EN 13022-2:2014 | Glass in building - Structural sealant glazing - Part 2: Assembly rules |
| EN 12152:2002 | Curtain walling - Air permeability - Performance requirements and classification |
| EN 12154:1999 | Curtain walling - Watertightness - Performance requirements and classification |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
| EN 1096-2:2012 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings |
| EN ISO 10848-2:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.