I.S. EN 13566-4:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
Hardcopy , PDF
05-11-2011
English
01-01-2003
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 Terms and definitions
3.2 Symbols and abbreviations
4 Pipes at the "M" stage
4.1 Materials
4.2 General characteristics
4.3 Material characteristics
4.4 Geometric characteristics
4.5 Mechanical characteristics
4.6 Physical characteristics
4.7 Jointing
4.8 Marking
5 Fittings at the "M" stage
5.1 Materials
5.2 General characteristics
5.3 Material characteristics
5.4 Geometric characteristics
5.5 Mechanical characteristics
5.6 Physical characteristics
5.7 Jointing
5.8 Marking
6 Ancillary components
7 Fitness for purpose of the lining system at the "I"
stage
7.1 Materials
7.2 General characteristics
7.3 Material characteristics
7.4 Geometric characteristics
7.5 Mechanical characteristics
7.6 Physical characteristics
7.7 Additional characteristics
7.8 Sampling
8 Installation practice
8.1 Preparatory work
8.2 Storage, handling and transport of pipe components
8.3 Equipment
8.4 Installation
8.5 Process-related inspection and testing
8.6 Lining termination
8.7 Reconnecting to existing manholes and laterals
8.8 Final inspection and testing
8.9 Documentation
Annex A (informative) Recommended scheme for assessment
of conformity
A.1 Scope
A.2 General
A.3 Testing and Inspection
Annex B (informative) CIPP components and their functions
Annex C (normative) Cured-in-place pipes - Modifications
to EN ISO 178 for flexural testing
C.1 General
C.2 Apparatus
C.3 Test piece shape and dimensions
C.4 Procedure
C.5 Calculation and expression of results
C.6 Test report
Annex D (normative) Cured-in-place pipes - Test method for
the determination of long-term flexural modulus
under wet conditions
D.1 Scope
D.2 Principle
D.3 Apparatus
D.4 Sample preparation
D.5 Preparation of test pieces
D.6 Procedure
D.7 Test report
Bibliography
Gives requirements and test methods for cured-in-place pipes and fittings used for renovation of underground non-pressure drainage and sewerage networks.
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| BS EN 13566-4:2002 | Identical |
| NBN EN 13566-4 : 2003 | Identical |
| UNE-EN 13566-4:2003 | Identical |
| DIN EN 13566-4:2003-04 | Identical |
| NS EN 13566-4 : 1ED 2003 | Identical |
| NEN EN 13566-4 : 2003 | Identical |
| EN 13566-4:2002 | Identical |
| NF EN 13566-4 : 2003 | Identical |
| SN EN 13566-4 : 2003 | Identical |
| UNI EN 13566-4 : 2005 | Identical |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| PREN 14364 : DRAFT 2011 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| EN 1120:1996 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
| ISO/TR 11295:1992 | Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings |
| EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
| EN 13689 : 2002 | GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION |
| EN 1228:1996 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| PREN ISO 3126 : DRAFT 1999 | PLASTICS PIPING SYSTEMS - PLASTICS PIPING COMPONENTS - MEASUREMENT AND DETERMINATION OF DIMENSIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.