I.S. EN 13370:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, EASILY LIBERATABLE CN[-], F[-]
Hardcopy , PDF
11-28-2011
English
01-01-2003
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sample pre-treatment
5 Blank determination
6 Interference
7 Selection of the suitable test method
8 Expression of results
9 Test report
Annex A (informative) Validation of EN 13370
A.1 General
A.2 Interlaboratory study
A.3 Selection of Laboratories
A.4 Selection of samples
A.5 Validation scope
A.6 Results and statistics
A.7 Conclusion
Bibliography
Describes methods for the determination of the parameters Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN[-], F[-] in aqueous eluates for the characterization of waste.
| DevelopmentNote |
Supersedes I.S. ENV 13370. (10/2003)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 13370 : 2004 | Identical |
| NS EN 13370 : 1ED 2003 | Identical |
| EN 13370:2003 | Identical |
| NF EN 13370 : 2004 | Identical |
| SN EN 13370 : 2003 | Identical |
| BS EN 13370:2003 | Identical |
| NEN EN 13370 : 2003 | Identical |
| NBN EN 13370 : 2003 | Identical |
| UNE-EN 13370:2004 | Identical |
| DIN EN 13370:2003-09 | Identical |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| EN ISO 14403:2002 | Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002) |
| ISO 14402:1999 | Water quality Determination of phenol index by flow analysis (FIA and CFA) |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
| EN 27888:1993 | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
| EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
| ISO/TR 13530:1997 | Water quality Guide to analytical quality control for water analysis |
| EN 1484:1997 | Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
| ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
| ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
| ENV ISO 13530:1998 | Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997) |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 14403:2002 | Water quality Determination of total cyanide and free cyanide by continuous flow analysis |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| EN ISO 14402:1999 | Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999) |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| EN 1485 : 1996 | WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.