I.S. EN 13353:2008
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SOLID WOOD PANELS (SWP) - REQUIREMENTS
Hardcopy , PDF
05-12-2011
English
01-29-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms, definitions and classes
4 Requirements
5 Supplementary properties
6 Verification of compliance
7 Marking
Annex A (normative) - Properties for structural and
non-structural applications
Bibliography
Describes requirements for solid wood panels as defined in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of EN 1995-1-1.
| DevelopmentNote |
2008 Edition Re-Issued in May 2011 & incorporates AMD 1 2011. (05/2011)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| BS EN 13353 : 2008 | Identical |
| NF EN 13353 : 2009 + A1 2011 | Identical |
| NBN EN 13353 : 2009 + A1 2011 | Identical |
| EN 13353:2008+A1:2011 | Identical |
| DIN EN 13353:2011-07 | Identical |
| SN EN 13353 : 2008 + A1 2011 | Identical |
| NEN EN 13353 : 2008 + A1 2011 | Identical |
| UNI EN 13353 : 2011 | Identical |
| NS EN 13353 : 2008 + A1 2011 | Identical |
| ONORM EN 13353 : 2011 | Identical |
| UNE-EN 13353:2009 | Identical |
| S.R. 82:2017 | SLATING AND TILING - CODE OF PRACTICE |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 635-2:1995 | Plywood - Classification by surface appearance - Part 2: Hardwood |
| EN 13017-1:2000 | Solid wood panels - Classification by surface appearance - Part 1: Softwood |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 12369-3:2008 | Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels |
| EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
| EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| EN 635-1:1994 | Plywood - Classification by surface appearance - Part 1: General |
| EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 13017-2:2000 | Solid wood panels - Classification by surface appearance - Part 2: Hardwood |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 315:2000 | Plywood - Tolerances for dimensions |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 13354:2008 | Solid wood panels (SWP) - Bonding quality - Test method |
| EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| EN 635-3:1995 | Plywood - Classification by surface appearance - Part 3: Softwood |
| CEN/TS 635-4:2007 | Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline |
| DIN 53255:1964-06 | TESTING OF WOOD ADHESIVES AND GLUED WOOD JOINTS - MECHANICAL DELAMINATION TESTS BY GROOVING AND CHOPPING |
| EN 12775:2001 | Solid wood panels - Classification and terminology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.