I.S. EN 13200-4:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
Hardcopy , PDF
09-02-2023
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 General requirements of construction
5.1 Seats
5.2 General requirements for fixing elements and fixing
methods
5.2.1 General
5.2.2 Criteria for presentation of designs
5.2.3 Acceptance testing
6 Sampling and conditioning
6.1 Sampling
6.2 Conditioning
7 Characteristics of materials
7.1 General
7.2 Corrosion resistance
7.3 Resistance to weathering agents/stability to light
7.4 Temperature resistance
8 Strength and durability requirements
9 Test report
10 Seating numbers
11 Instruction for use
12 Marking
Annex A (informative) Temperature resistance
A.1 Temperature resistance
A.1.1 General
A.1.2 Low temperature test
A.1.3 High temperature test
Annex B (informative) Examples of seats
Annex C (informative) Ergonomy
C.1 Ergonomy
C.1.1 Anthropometric aspects and data
C.1.2 Design requirements
Bibliography
Specifies the mechanical, physical and chemical product characteristics of fixed seating used in sports venues (indoor and outdoor) in the spectator viewing area (S.V.A.).
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 13200-4 : 1ED 2007 | Identical |
| UNI EN 13200-4 : 2007 | Identical |
| BS EN 13200-4:2006 | Identical |
| UNE-EN 13200-4:2008 | Identical |
| DIN EN 13200-4:2006-12 | Identical |
| NEN EN 13200-4 : 2006 | Identical |
| EN 13200-4:2006 | Identical |
| NBN EN 13200-4 : 2007 | Identical |
| NF EN 13200-4 : 2007 | Identical |
| ONORM EN 13200-4 : 2006 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 12727:2016 | Furniture - Ranked seating - Requirements for safety, strength and durability |
| ISO/IEC 17050-1:2004 | Conformity assessment Supplier's declaration of conformity Part 1: General requirements |
| ENV 581-2 : DRAFT 2000 | OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 2: MECHANICAL SAFETY REQUIREMENTS AND TEST METHODS FOR SAMPLING |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| EN 13200-1:2012 | Spectator facilities - Part 1: General characteristics for spectator viewing area |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| ISO/IEC 17050-2:2004 | Conformity assessment Supplier's declaration of conformity Part 2: Supporting documentation |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| EN ISO/IEC 17050-1:2010 | Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
| EN ISO/IEC 17050-2:2004 | Conformity assessment - Supplier's declaration of conformity - Part 2: Supporting documentation (ISO/IEC 17050-2:2004) |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.