I.S. EN 13148:2010
Current
The latest, up-to-date edition.
COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
Hardcopy , PDF
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labelling
Annex A (normative) - Testing of solderability of hot-dip
tinned strip by means of vertical dipping test
Annex B (normative) - Measuring of coating thickness with
X-ray spectrometric method according to EN ISO 3497
Bibliography
Specifies: - the composition and tolerances on dimensions of strip produced by rolling in the thickness range from 0,10 mm up to and including 1,50 mm of copper and copper alloys to be tinned, with tin, a tin-lead alloy or other tin alloys; - the composition of material normally used for the melt; - the properties of strip before tinning; - the properties of hot-dip tinned strip; - the preferred thicknesses (mean values) and thickness ranges of coatings; - the edgewise curvature of hot-dip tinned strip; - the sampling procedure; - the methods of test to be used for verification of conformity to the requirements of this European Standard; - the delivery conditions.
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 13148:2010 | Identical |
| EN 13148:2010 | Identical |
| SN EN 13148 : 2010 | Identical |
| NF EN 13148 : 2011 | Identical |
| NBN EN 13148 : 2010 | Identical |
| NS EN 13148 : 1ED 2010 | Identical |
| UNE-EN 13148:2012 | Identical |
| NEN EN 13148 : 2010 | Identical |
| UNI EN 13148 : 2010 | Identical |
| DIN EN 13148:2010-12 | Identical |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 2624:1990 | Copper and copper alloys — Estimation of average grain size |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 3497:2000 | Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000) |
| EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| ISO 7438:2016 | Metallic materials Bend test |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 9453:2014 | Soft solder alloys - Chemical compositions and forms (ISO 9453:2014) |
| EN ISO 2624:1995 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9453:2014 | Soft solder alloys Chemical compositions and forms |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.