I.S. EN 1265:2000
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
Hardcopy , PDF
01-16-2009
English
01-28-2000
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description of machinery family
5 Sound power level determination
5.1 Basic international standards to be used
5.2 Measurement uncertainty
5.3 Measurement procedure
6 Emission sound pressure level determination
6.1 Basic international standards to be used
6.2 Selection of relevant work stations
6.3 Measurement uncertainty
6.4 Measurement procedure
7 Installation and mounting conditions
8 Operating conditions
9 Measurement uncertainties
10 Information to be recorded
11 Information to be reported
12 Declaration and verification of noise emission values
Annex A (normative) Coremaking machines
Annex B (normative) Moulding machines
Annex C (normative) Knock-out grids and knock-out trays
Annex D (normative) Centrifugal dry abrasive blasting equipment
Annex E (normative) Air-blasting equipment
Annex F (normative) High pressure diecasting machines
Annex G (informative) Core making machines - Data sheet -
noise test code
Annex H (informative) Moulding machines - Data sheet -
Noise test code
Annex I (informative) Knock-out grids and knock-out trays -
Data sheet - Noise test code
Annex J (informative) Centrifugal dry abrasive blasting
equipment - Data sheet - Noise test code
Annex K (informative) Air blasting equipment - Data sheet -
Noise test
Annex L (informative) High pressure diecasting machine -
Data sheet - Noise test code
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Describes all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission values of several groups of foundry machinery.
| DevelopmentNote |
2000 Edition Re-Issued in January 2009 & incorporates AMD 1 2008. (01/2009)
|
| DocumentType |
Standard
|
| Pages |
47
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 1265:2000 | Identical |
| DIN EN 1265:2009-07 | Identical |
| EN 1265:1999+A1:2008 | Identical |
| NBN EN 1265 : 99 + A1 2009 | Identical |
| NEN EN 1265 : 1999 + A1 2008 | Identical |
| SN EN 1265 : 1999 + A1 2009 | Identical |
| BS EN 1265 : 1999 | Identical |
| NS EN 1265 : 1999 + A1 2008 | Identical |
| UNI EN 1265 : 2009 | Identical |
| NF EN 1265 : 1999 + A1 2009 | Identical |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| EN 1248:2001+A1:2009 | Foundry machinery - Safety requirements for abrasive blasting equipment |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 869:2006+A1:2009 | Safety of machinery - Safety requirements for pressure metal diecasting units |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.