I.S. EN 12566-3:2016
Current
Current
The latest, up-to-date edition.
SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
09-19-2016
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviated terms
4 Product characteristics
5 Testing, assessment and sampling methods
6 Assessment and verification of constancy of performance – AVCP
7 Classification and designation (Nominal designation)
8 Marking, labelling and packaging
Annex A (normative) Watertightness test
Annex B (normative) Treatment efficiency test procedure
Annex C (normative) Test methods for structural behaviour
Annex D (normative) Mechanical characteristics used for structural behaviour calculation
Annex E (informative) Analysis method
Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation
Bibliography
Defines requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants.
| Committee |
CEN/TC 165
|
| DocumentType |
Test Method
|
| Pages |
70
|
| ProductNote |
NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document.
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 12566-3 : 2016 | Identical |
| SN EN 12566-3 : 2016 | Identical |
| UNI EN 12566-3 : 2013 | Identical |
| NF EN 12566-3 : 2016 | Identical |
| NS EN 12566-3 : 2016 | Identical |
| EN 12566-3:2016 | Identical |
| BS EN 12566-3 : 2005 | Identical |
| DIN EN 12566-3:2016-12 | Identical |
| UNE-EN 12566-3:2017 | Identical |
| NEN EN 12566-3 : 2016 | Identical |
| S.R. 66:2015 | STANDARD RECOMMENDATION PROVIDING GUIDANCE TO WASTEWATER TREATMENT PRODUCTS IN COMPLIANCE WITH THE EN 12566 SERIES OF STANDARDS |
| ISO 5664:1984 | Water quality — Determination of ammonium — Distillation and titration method |
| EN ISO 13229:2011 | Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010) |
| EN 14150:2006 | Geosynthetic barriers - Determination of permeability to liquids |
| ISO 6778:1984 | Water quality — Determination of ammonium — Potentiometric method |
| ISO 13229:2010 | Thermoplastics piping systems for non-pressure applications Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings Determination of the viscosity number and K-value |
| ISO 5663:1984 | Water quality — Determination of Kjeldahl nitrogen — Method after mineralization with selenium |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN ISO 9967:2016 | Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016) |
| EN 978:1997 | Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta |
| ISO 5815:1989 | Water quality Determination of biochemical oxygen demand after 5 days (BOD 5) Dilution and seeding method |
| EN 1899-1:1998 | Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, modified) |
| ISO 1133-1:2011 | Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
| EN 872:2005 | Water quality - Determination of suspended solids - Method by filtration through glass fibre filters |
| EN 976-1:1997 | Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks |
| EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN 25663:1993 | Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium (ISO 5663:1984) |
| ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
| EN ISO 1133-2:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011) |
| EN ISO 11905-1:1998 | Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997) |
| EN 12311-2:2013 | Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
| ISO 11905-1:1997 | Water quality — Determination of nitrogen — Part 1: Method using oxidative digestion with peroxodisulfate |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| ISO 6060:1989 | Water quality — Determination of the chemical oxygen demand |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| EN 12260:2003 | Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides |
| ISO 15681-2:2003 | Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA) |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| EN ISO 15681-2:2004 | Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2003) |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| EN 476:2011 | General requirements for components used in drains and sewers |
| EN ISO 1133-1:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 899-2:2003 | Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| ISO 15705:2002 | Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method |
| EN ISO 9969:2016 | Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
| EN ISO 6878:2004 | Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 580:2003 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| ISO 9967:2016 | Thermoplastics pipes Determination of creep ratio |
| ISO 6878:2004 | Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method |
| EN 1905:1998 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
| ISO 1133-2:2011 | Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 2: Method for materials sensitive to time-temperature history and/or moisture |
| EN ISO 2505:2005 | Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005) |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 9969:2016 | Thermoplastics pipes Determination of ring stiffness |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| EN ISO 14911:1999 | Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998) |
| ISO 14911:1998 | Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| ISO 2505:2005 | Thermoplastics pipes — Longitudinal reversion — Test method and parameters |
| EN ISO 13395:1996 | Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.