I.S. EN 12416-1:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
Hardcopy , PDF
02-02-2022
English
08-24-2001
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements for components
5 Powder container
6 Expellant gas container assembly
7 Pressure gauges
8 Pressure regulators
9 Actuators
10 Main isolating valve and selector valve
11 Nozzles
12 Documentation
13 Marking
14 Type test methods
15 Evaluation of conformity
Annex A (normative) Compliance test
Annex B (normative) Internal pressure test
Annex C (normative) Operating force and function test
Annex D (normative) Determination of the remaining media
in the container after discharge
Annex E (normative) Opening and closing times
Annex F (normative) Low temperature test for actuators and valves
Annex G (normative) High temperature test
Annex H (normative) Vibration test
Annex I (normative) Reliability test
Annex J (normative) Salt spray corrosion test
Annex K (normative) Stress corrosion test
Annex L (normative) Strength test for pressure regulators, main
isolating valves and selector valves
Annex M (normative) Jet velocity test
Annex N (normative) Flow rate test
Bibliography
Covers requirements and test methods for materials, construction and performance of components intended for use in powder firefighting systems complying with prEN 12416-2:2000.
| DevelopmentNote |
2001 Edition Re-Issued in July 2007 & incorporates AMD 2 2007. (07/2007)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 12416-1:2001 | Identical |
| EN 12416-1:2001+A2:2007 | Identical |
| NS EN 12416-1 : 2001 + A2 2007 | Identical |
| BS EN 12416-1:2001 | Identical |
| NBN EN 12416-1 : 2001 + A2 2007 | Identical |
| NF EN 12416-1 : 2001 + A2 2007 | Identical |
| NEN EN 12416-1 : 2001 + A2 2007 | Identical |
| DIN EN 12416-1:2007-09 | Identical |
| SN EN 12416-1 : 2001 + A2 2007 | Identical |
| UNI EN 12416-1 : 2007 | Identical |
| ONORM EN 12416-1 : 2008 | Identical |
| EN 615:2009 | Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders) |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| EN 1964-1:1999/AC:1999 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA |
| EN 1964-3:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
| EN 12094-8:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
| EN 12094-4:2004 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| EN 1964-2 : 2001 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES - PART 2: CYLINDERS MADE OF SEAMLESS STEEL WITH AN R[M] VALUE OF 1 100 MPA AND ABOVE |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 12094-5:2006 | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.