I.S. EN 12273:2008
Current
The latest, up-to-date edition.
SLURRY SURFACING - REQUIREMENTS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Requirements
5.1 Constituent materials
5.1.1 General
5.1.2 Binders
5.1.3 Aggregates
5.1.4 Grading curves
5.2 Slurry surfacing
5.2.1 Defects as determined by visual assessment
5.2.2 Skid resistance
5.2.3 Characterising noise generation (other
characteristics)
5.3 Durability
5.3.1 General
5.3.2 Skid resistance
5.3.3 Bond
6 Evaluation of conformity
Annex A (normative) Factory Production Control (FPC)
A.1 General
A.2 General requirements
A.3 Product specific requirements
Annex B (normative) Minimum test frequencies for Factory Production
Control (FPC)
Annex C (normative) Type Approval Installation Trial (TAIT)
C.1 General
C.2 Requirements
C.3 Records
C.4 Information availability
Annex ZA (informative) Clauses of this European Standard addressing
the provisions of the EU Construction Product Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for attestation of conformity of slurry
surfacing
ZA.3 CE marking and labelling
Bibliography
Defines the performance requirements and control procedures for the installation of slurry surfacing as a product for the surface treatment of roads and other trafficked areas (e.g. footways, cycleways).
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 12273:2008 | Identical |
| S.R. 62:2018 | GUIDANCE ON THE USE OF I.S. EN 12273:2008 SLURRY SURFACING - REQUIREMENTS |
| EN 14895:2006 | Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders |
| EN 13075-1:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| ISO 13473-1:1997 | Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth |
| EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| EN 13589:2008 | Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| EN ISO 11819-1:2001 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997) |
| ISO 11819-1:1997 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
| EN 12274-7:2005 | Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
| EN 12274-8:2005 | Slurry surfacing - Test methods - Part 8: Visual assessment of defects |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| EN 13036-1:2010 | Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
| EN 933-6:2014 | Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
| EN 933-9:2009+A1:2013 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| EN 13588:2017 | Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 933-8:2012+A1:2015 | Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
| EN ISO 13473-1:2004 | Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth (ISO 13473-1:1997) |
| EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| EN 12846:2002 | Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer |
| EN 13074:2002 | Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.