I.S. EN 12080:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
Hardcopy , PDF
06-16-2022
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Technical specification
5 Quality systems
6 Manufacture
7 Material properties
8 Geometry and dimensions
9 Mechanical properties - inner ring expanding ability
10 Physical properties
11 Marking
12 Inspection
13 Quality records
14 Approval
15 Delivery and packing
Annex A (normative) - Ultrasonic inspection of rolling bearing
rings
Annex B (normative) - Magnetic particle inspection of ring surfaces
Annex C (normative) - Eddy current inspection of the raceways of
the rollers
Annex D (normative) - Cages of polymeric material
Annex E (normative) - Approval procedures
Annex F (normative) - Criteria to determine the extent of
approval procedures
Annex G (informative) - Examples of axlebox assemblies
Annex ZA (informative) - Relationship between this European
standard and the Essential Requirements of EU Directive
2008/57/EC aimed to be covered
Bibliography
Defines the quality parameters of axlebox rolling bearings supporting the load of the vehicle, required for reliable operation of trains on European networks. Also covers metallurgical and material properties as well as geometric and dimensional characteristics.
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| BS EN 12080:2017 | Identical |
| DIN EN 12080:2015-06 (Draft) | Identical |
| NEN EN 12080 : 2017 | Identical |
| UNI EN 12080 : 2011 | Identical |
| EN 12080:2017 | Identical |
| NBN EN 12080 : 2008 + A1 2010 | Identical |
| NF EN 12080 : 2017 | Identical |
| ONORM EN 12080 : 2017 | Identical |
| UNE-EN 12080:2008 | Identical |
| SN EN 12080:2017 | Identical |
| DIN EN 12080:2017-11 | Identical |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 3059:2012 | Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions |
| ISO 6508-3:2015 | Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
| EN ISO 3451-1:2008 | Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008) |
| ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
| EN ISO 6721-1:2011 | Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011) |
| ISO 2039-1:2001 | Plastics Determination of hardness Part 1: Ball indentation method |
| EN ISO 9934-3:2015 | Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015) |
| EN 12081:2017 | Railway applications - Axleboxes - Lubricating greases |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| EN 12082:2017 | Railway applications - Axleboxes - Performance testing |
| ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| ASTM E 975 : 2013 : REDLINE | Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation (Withdrawn 2022) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 2039-1:2003 | Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001) |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
| ISO 1183-2:2004 | Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
| ISO 307:2007 | Plastics Polyamides Determination of viscosity number |
| ISO 492:2014 | Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 1172:1998 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 9934-2:2015 | Non-destructive testing — Magnetic particle testing — Part 2: Detection media |
| EN 15663:2017 | Railway applications - Vehicle reference masses |
| ISO 9934-3:2015 | Non-destructive testing — Magnetic particle testing — Part 3: Equipment |
| EN 13018:2016 | Non-destructive testing - Visual testing - General principles |
| EN ISO 9934-2:2015 | Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015) |
| EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| EN ISO 2639:2002 | Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002) |
| ISO 6721-1:2011 | Plastics Determination of dynamic mechanical properties Part 1: General principles |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ISO 263:1973 | ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in |
| EN ISO 3059:2012 | Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012) |
| EN ISO 1183-2:2004 | Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004) |
| EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.