I.S. EN 12020-1:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
Hardcopy , PDF
04-15-2022
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
4.1 General
4.2 Reference to a drawing
5 Requirements
5.1 Production and manufacturing processes
5.2 Quality control
5.3 Chemical composition limit
5.4 Mechanical properties
5.5 Freedom from surface defects
5.6 Tolerances on dimensions and form
5.7 Section mass
6 Test procedures
6.1 Sampling
6.2 Test methods
7 Inspection documents
8 Marking of products
9 Packaging
10 Arbitration
Bibliography
Describes technical conditions for inspection and delivery of alloys EN AW-6060 and EN AW-6063 extruded precision profiles manufactured with and without a thermal barrier and without further surface treatment.
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 12020-1:2008 | Identical |
| SN EN 12020-1 : 2008 | Identical |
| UNI EN 12020-1 : 2008 | Identical |
| NS EN 12020-1 : 2ED 2008 | Identical |
| NF EN 12020-1 : 2008 | Identical |
| UNE-EN 12020-1:2009 | Identical |
| BS EN 12020-1:2008 | Identical |
| NEN EN 12020-1 : 2008 | Identical |
| NBN EN 12020-1 : 2008 | Identical |
| ONORM EN 12020-1 : 2008 | Identical |
| DIN EN 12020-1:2008-06 | Identical |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 12373-1 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| EN 14361:2004 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| EN 14024:2004 | Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.