Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • Shopping Cart
    There are no items in your cart
Please enter a keyword to search
Advanced search
Home
Publishers
NSAI
I.S. EN 1092-1:2007

I.S. EN 1092-1:2007

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES

Available format(s)

Hardcopy , PDF

Superseded date

12-06-2018

Superseded by

I.S. EN 1092-1:2018

Language(s)

English

Published date

01-01-2007

Publisher

National Standards Authority of Ireland

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Hardcopy - English
PDF - English

National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 General requirements
Annex A (normative) - Wall thickness and end preparation
        for flanges type 11, 34, 35, 36, 37 and pipe nominal
        thicknesses for the use with type 01 flanges
Annex B (informative) - Material groups
Annex C (informative) - Approximate masses of flanges
        and collars
Annex D (informative) - Additional materials
Annex E (normative) - Basis of flange calculation
Annex F (normative) - Determination of p/T ratings
Annex G (normative) - p/T ratings for a selection of EN
        materials
Annex H (informative) - Rings for flanges with groove
Annex I (informative) - Flanges with fixed inner diameter
Annex J (informative) - Mating dimensions for flanges
        with higher DN
Annex ZA (informative) - Relationship between this
         European Standard and the Essential Requirements
         of EU Directive 2014/68/EU Pressure Equipment
         Directive aimed to be covered
Bibliography

Defines the flange types and their facings, dimensions, tolerances, threading, bolt sizes, flange jointing face surface finish, marking, materials, pressure/temperature ratings and approximate flange masses.

DocumentType
Standard
Pages
130
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy
Supersedes

I.S. 820:2010 NON-DOMESTIC GAS INSTALLATIONS

ISO 17636-1:2013 Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
EN ISO 9692-1:2013 Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
EN 1514-1:1997 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
CEN/TS 1591-3:2007 Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
EN 1591-1:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
EN 1708-1:2010 Welding - Basic welded joint details in steel - Part 1: Pressurized components
EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
ISO 15614-13:2012 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding
ISO 11666:2010 Non-destructive testing of welds Ultrasonic testing Acceptance levels
EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
ISO 23277:2015 Non-destructive testing of welds Penetrant testing Acceptance levels
EN 10213:2007+A1:2016 Steel castings for pressure purposes
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN ISO 10675-1:2016 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016)
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
EN 1759-4:2003 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
DIN 17102:1983-10 WELDABLE NORMALIZED FINE GRAIN STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS FOR PLATE, STRIP, WIDE FLATS, SECTIONS AND BARS
EN ISO 23278 : 2015 NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015)
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes General plan
ISO 23278:2015 Non-destructive testing of welds Magnetic particle testing Acceptance levels
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
DIN 1681:1985-06 CAST STEELS FOR GENERAL PURPOSES - TECHNICAL DELIVERY CONDITIONS
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
ISO 17640:2017 Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN ISO 1127:1996 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 3452-1:2013 Non-destructive testing Penetrant testing Part 1: General principles
EN ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
ISO 9692-1:2013 Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
EN 1515-2:2001 Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN 1514-2:2014 Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
EN 10272:2016 Stainless steel bars for pressure purposes
EN ISO 17637:2016 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN 10222-3:2017 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10021:2006 General technical delivery conditions for steel products
ISO 4200:1991 Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
ISO 17636-2:2013 Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
EN 22768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 1333:2006 Flanges and their joints - Pipework components - Definition and selection of PN
EN 10204:2004 Metallic products - Types of inspection documents
CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
EN 1591-2:2008 Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
ISO 17637:2016 Non-destructive testing of welds Visual testing of fusion-welded joints
EN 10226-3:2005 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
EN ISO 15614-13:2012 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012)
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
ISO 9692-2:1998 Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 17638:2016 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
ISO 10675-1:2016 Non-destructive testing of welds Acceptance levels for radiographic testing Part 1: Steel, nickel, titanium and their alloys
EN 764-3:2002 Pressure equipment - Part 3: Definition of parties involved
ISO 17638:2016 Non-destructive testing of welds Magnetic particle testing
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
ISO 4014:2011 Hexagon head bolts Product grades A and B
ISO 1127:1992 Stainless steel tubes Dimensions, tolerances and conventional masses per unit length

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us