I.S. EN 10218-1:2012
Current
The latest, up-to-date edition.
STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
Hardcopy , PDF
English
01-01-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Tensile test
4 Simple torsion test
5 Reverse bend test
6 Wrapping test
7 Bend test
8 Reverse torsion test
9 Compression test
10 Deep etch test
11 Hardness test
12 Quench hardenability test
13 Fatigue test (bend and axial)
14 Wire cast measurement
15 Artificial ageing
16 Decarburization test
17 Non-destructive tests
18 Grain size test
19 Segregation test
20 Non-metallic inclusion test
21 Chemical analysis
22 Retests
Describes the methods for the general testing of steel wire and wire products which have been cold worked, annealed or oil hardened and tempered and/or coated and are of constant cross section, either round, or special section.
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 10218-1:2012 | Identical |
| NF EN 10218-1 : 2012 | Identical |
| NS EN 10218-1 : 2012 | Identical |
| SN EN 10218-1 : 2012 | Identical |
| NEN EN 10218-1 : 2012 | Identical |
| BS EN 10218-1:2012 | Identical |
| NBN EN 10218-1 : 2012 | Identical |
| UNE-EN 10218-1:2012 | Identical |
| UNI EN 10218-1 : 2012 | Identical |
| DIN EN 10218-1:2012-03 | Identical |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| ISO 6508-3:2015 | Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 9649:2016 | Metallic materials — Wire — Reverse torsion test |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 7802:2013 | Metallic materials — Wire — Wrapping test |
| ISO 7801:1984 | Metallic materials — Wire — Reverse bend test |
| EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 7800:2012 | Metallic materials — Wire — Simple torsion test |
| EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.