I.S. EN 10132-1:2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
Hardcopy , PDF
10-09-2021
English
01-01-2000
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 Manufacturing process
6.1 General
6.2 Deoxidation
7 Requirements
7.1 General
7.2 Method of delivery
7.3 Delivery condition
7.4 Chemical composition
7.5 Mechanical properties
7.6 Structure
7.7 Surface finish
7.8 Dimensions and tolerances on dimensions and shape
8 Inspection
8.1 General
8.2 Specific inspection and testing
9 Sampling
10 Test methods
10.1 Chemical analysis
10.2 Tensile test
10.3 Hardness test
11 Labelling, packaging and protection
12 Retests
Annex A (normative): Supplementary or special requirements
Bibliography
Describes the general technical delivery conditions for non alloy and alloy cold rolled narrow steel strip in rolling widths less than 600 mm for heat treatment.
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 10132-1:2001 | Identical |
| NBN EN 10132-1 : 2000 | Identical |
| SN EN 10132-1 : 2000 | Identical |
| UNI EN 10132-1 : 2002 | Identical |
| NS EN 10132-1 : 1ED 2000 | Identical |
| NF EN 10132-1 : 2000 | Identical |
| EN 10132-1:2000 | Identical |
| NEN EN 10132-1 : 2000 | Identical |
| BS EN 10132-1:2000 | Identical |
| ONORM EN 10132-1 : 2000 | Identical |
| DIN EN 10132-1:2000-05 | Identical |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10132-3:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN 10140:2006 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EURONORM 103 : 1971 | MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS |
| ENV 606 : DRAFT 1993 | BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ENV 10247 : 1998 COR 2000 | MICROGRAPHIC EXAMINATION OF THE NONMETALLIC INCLUSION CONTENT OF STEEL USING STANDARD PICTURES |
| EN 10132-2:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10109-1 : 1994 | METALLIC MATERIALS - HARDNESS TEST - PART 1: ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T) |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.