I.S. 329:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS DISTRIBUTION MAINS (EDITION 3)
Hardcopy , PDF
03-26-2024
English
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
DECLARATION
Foreword
Schedule
1 Scope
2 Reference standards
3 Definitions
4 European standards
5 Quality
6 Materials
7 Design
8 Construction
9 Jointing
10 Proving tests
11 Alterations to live mains
12 Commissioning and decommissioning
13 Protection against environmental degradation
14 Monitoring of the gas infrastructure
15 Operation and maintenance
16 Records
17 Additional measures when dealing with Liquefied Petroleum
Gas (LPG) systems
Annex A (normative) - Purging criteria for Natural Gas
Annex B (informative) - Fusion joint integrity
Bibliography
Describes the minimum requirements for the design, construction, commissioning, operation, maintenance and alteration of polyethylene (PE) or metallic mains, for the distribution of gas at pressures up to and including 16 bar.
| DevelopmentNote |
Supersedes SR 10. (09/2015)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| I.S. 821:2006 | GAS PRESSURE REGULATING STATIONS FOR DISTRIBUTION |
| I.S. 822:2007 | GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE PIPELINES |
| I.S. 265:2000 | INSTALLATION OF GAS SERVICE PIPES - PARTS 1 AND 2 (FOURTH EDITION) (INCLUDING AMENDMENT NO. 1) |
| I.S. 328:2015/AC1:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| I.S. 265-1:1994 | INSTALLATION OF GAS SERVICE PIPES |
| S.R. 12007-5:2016 | GUIDANCE ON THE APPLICATION OF I.S. EN 12007-5:2014, GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS |
| I.S. 3216:2010 | CODE OF PRACTICE - BULK STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) - (EDITION 2) |
| I.S. 328:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| I.S. EN ISO 6976:2016 | NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016) |
| I.S. EN 10226-1:2004 | PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 1: TAPER EXTERNAL THREADS AND PARALLEL INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION |
| I.S. 822:2007 | GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE PIPELINES |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 12327:2012 | GAS INFRASTRUCTURE - PRESSURE TESTING, COMMISSIONING AND DECOMMISSIONING PROCEDURES - FUNCTIONAL REQUIREMENTS |
| I.S. EN 10289:2002 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL LIQUID APPLIED EPOXY AND EPOXY-MODIFIED COATINGS |
| ISO 10838-2:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm |
| ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| I.S. EN 12732:2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| ISO/TR 16922:2013 | Natural gas — Odorization |
| I.S. EN ISO 9606-1:2017 | QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| I.S. EN 13636:2004 | CATHODIC PROTECTION OF BURIED METALLIC TANKS AND RELATED PIPING |
| ISO 11414:2009 | Plastics pipes and fittings Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| I.S. 3216:2010 | CODE OF PRACTICE - BULK STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) - (EDITION 2) |
| I.S. EN ISO 15607:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
| I.S. EN 12954:2001 | CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES |
| I.S. EN 10204:2004 | METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS |
| I.S. EN ISO 17636-1:2013 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 1: X- AND GAMMA-RAY TECHNIQUES WITH FILM (ISO 17636-1:2013) |
| I.S. 820:2010 | NON-DOMESTIC GAS INSTALLATIONS |
| I.S. EN ISO 13477:2008 | THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - SMALL-SCALE STEADY-STATE TEST (S4 TEST) |
| I.S. EN 10290:2002 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL LIQUID APPLIED POLYURETHANE AND POLYURETHANE-MODIFIED COATINGS |
| I.S. EN 15112:2006 | EXTERNAL CATHODIC PROTECTION OF WELL CASINGS |
| I.S. EN 10288:2002 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO LAYER EXTRUDED POLYETHYLENE BASED COATINGS |
| I.S. EN 12186:2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| I.S. 328:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| I.S. EN 12007-1:2012 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 1: GENERAL FUNCTIONAL REQUIREMENTS |
| I.S. 265:2000 | INSTALLATION OF GAS SERVICE PIPES - PARTS 1 AND 2 (FOURTH EDITION) (INCLUDING AMENDMENT NO. 1) |
| I.S. EN 12007-3:2015 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| I.S. EN 12068:1999 | CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
| I.S. EN ISO 17636-2:2013 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 2: X- AND GAMMA-RAY TECHNIQUES WITH DIGITAL DETECTORS (ISO 17636-2:2013) |
| I.S. EN 12007-4:2012 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 4: SPECIFIC FUNCTIONAL REQUIREMENTS FOR RENOVATION |
| I.S. EN 12007-2:2012 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.