HD 633 S1:1997

PART 1 General test methods
PART 2 Additional test methods
PART 3 List of test requirements for specific cable designs
     3-A List of test requirements for cable design type 3A
     3-B List of test requirements for cable design type 3B
     3-C List of test requirements for cable design type 3C
     3-D List of test requirements for cable design type 3D
     3-E List of test requirements for cable design type 3E
     3-F List of test requirements for cable design type 3F
     3-G List of test requirements for cable design type 3G

HD 633 applies to tests on radial field, oil-filled (fluid-filled), paper or polypropylene paper laminate (PPL) insulated metal-sheathed cables and their accessories, which operate with a minimum static pressure of between 20 kPa (0,2 bar) and 300 kPa (3,0 bar) inclusive, a maximum static pressure of not more than 800 kPa (8,0 bar) and a minimum transient pressure of not less than 20 kPa (0,2 bar). (The quoted pressures are above atmospheric pressure.)NOTE 1:The term 'oil-filled' is under consideration as it does not adequately reflect the nature of the impregnants used in modern cables.NOTE 2: The cables in this HD are specifically excluded from the scope of the proposedPressure Equipment Directive.HD 633 is applicable also to cables and accessories with maximum static pressures exceeding 800 kPa (8,0 bar). except that sub-clauses 3.2, 4.5 and 5.2 may be appropriately modified by agreement between the purchaser and the manuf acturer.The tests are applicable to cables and accessories intended to be used in systems with nominal voltages not exceeding 400 kV between phases.This Part (Part 1) specifies the general test methods applicable to these cables, unless other wise specified in the particular sections of Part 3 of this HD. However, the summary of tests as listed in one only of the particular sections in Part 3 of this HD is mandatory for the particular cable ordered.Part 2 specifies additional test methods applicable only to certain particular sections of Part 3 of this HD.Part 3 specifies the lists of tests applicable to the particular cable type.For cables manufactured in long lengths, the application of this HD is subject to agreement between the purchaser and the manufacturer.