GEIA STD 0005-1 : 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PERFORMANCE STANDARD FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER
Available format(s)
Hardcopy , PDF
Superseded date
10-27-2023
Superseded by
Language(s)
English
Published date
01-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Forward
Acknowledgments
Introduction
1 Scope
2 References
3 Terms and Definitions
4 Symbols and Abbreviated Terms
5 Objectives
6 Technical requirements
7 Plan Administrative Requirements
Annex A - Template for Tailoring Requirements of
GEIA-STD-0005-1-A
Annex B - Requirements Matrix for GEIA-STD-0005-1-A
Annex C - Guidance on Configuration Control and
Product Identification
Describes the objectives of, and requirements for, documenting processes that assure customers and regulatory agencies that ADHP electronic systems containing Pb-free solder, piece parts, and PBs will satisfy the applicable requirements for performance, reliability, airworthiness, safety, and certifiability throughout the specified life of performance.
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
Government Electronics & Information Technology Association
|
| Status |
Superseded
|
| SupersededBy |
| PD IEC/TS 62239-2:2017 | Process management for avionics. Management plan Preparation and maintenance of an electronic COTS assembly management plan |
| IPC 7092 : 0 | DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR EMBEDDED COMPONENTS |
| MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| IEC PAS 62647-3:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes |
| IEC TS 62647-21:2013 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 21: Program management - Systems engineering guidelines for managing the transition to lead-free electronics |
| SAE ARP 5890 : 2011 | GUIDELINES FOR PREPARING RELIABILITY ASSESSMENT PLANS FOR ELECTRONIC ENGINE CONTROLS |
| PD IEC/TS 62647-1:2012 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Preparation for a lead-free control plan |
| IEC PAS 62647-23:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies |
| GEIA HB 0005-1 : 2006 | PROGRAM MANAGEMENT/SYSTEMS ENGINEERING GUIDELINES FOR MANAGING THE TRANSITION TO LEAD-FREE ELECTRONICS |
| DI-MGMT-81772 Base Document:2009 | LEAD-FREE CONTROL PLAN (LFCP) |
| MIL-STD-1796 Revision A:2011 | AVIONICS INTEGRITY PROGRAM (AVIP) |
| IEC TS 62647-3:2014 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes |
| IEC TS 62239-2:2017 | Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan |
| IEC TS 62239-1:2015 | Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan |
| GEIA HB 0005-3 : 2008 | REWORK/REPAIR HANDBOOK TO ADDRESS THE IMPLICATIONS OF LEAD-FREE ELECTRONICS AND MIXED ASSEMBLIES IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS |
| GEIA HB 0005-2 : 2007 | TECHNICAL GUIDELINES FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES |
| NASA STD 6016 : 2016 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| EIA STD 4899 : 2017-05 | REQUIREMENTS FOR AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
| EIA 933 : 2015 | REQUIREMENTS FOR A COTS ASSEMBLY MANAGEMENT PLAN |
| GEIA STD 0005-3 : 2013 | PERFORMANCE TESTING FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC INTERCONNECTS CONTAINING PB-FREE SOLDER AND FINISHES |
| NASA STD 8739.10 : 2017 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS ASSURANCE STANDARD |
| NASA JSC 66491 : 2013 | STANDARD FOR JSC LEAD-FREE CONTROL PLANS (LFCP) |
| IEC TS 62647-1:2012 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Preparation for a lead-free control plan |
| PD IEC/TS 62647-21:2013 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Program management. Systems engineering guidelines for managing the transition to lead-free electronics |
| ARINC 671 : 2006 | GUIDANCE FOR THE TRANSITION TO LEAD-FREE SOLDERING, MAINTENANCE, AND REPAIR |
| IEC PAS 62647-21:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 21: Program management - Systems engineering guidelines for managing the transition to lead-free electronics |
| PD IEC/TS 62239-1:2015 | Process management for avionics. Management plan Preparation and maintenance of an electronic components management plan |
| IEC TS 62647-23:2013 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies |
| PD IEC/TS 62647-23:2013 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies |
| IEC TS 62647-22:2013 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines |
| IEC PAS 62647-22:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines |
| DD IEC PAS 62647-23 : DRAFT AUG 2011 | PROCESS MANAGEMENT FOR AVIONICS - AEROSPACE AND DEFENCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER - PART 23: REWORK AND REPAIR GUIDANCE TO ADDRESS THE IMPLICATIONS OF LEAD-FREE ELECTRONICS AND MIXED ASSEMBLIES |
| PD IEC/TS 62647-3:2014 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Performance testing for systems containing lead-free solder and finishes |
| DD IEC PAS 62647-3 : DRAFT SEP 2011 | PROCESS MANAGEMENT FOR AVIONICS - AEROSPACE AND DEFENCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER - PART 3: PERFORMANCE TESTING FOR SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES |
| PD IEC/TS 62647-22:2013 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Technical guidelines |
| IPC J STD 609 : A | MARKING AND LABELING OF COMPONENTS, PCBS AND PCBAS TO IDENTIFY LEAD (PB), LEAD-FREE (PB-FREE) AND OTHER ATTRIBUTES |
| GEIA HB 0005-2 : 2007 | TECHNICAL GUIDELINES FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES |
| IPC WP 006 : 2003 | ROUND ROBIN TESTING AND ANALYSIS - LEAD-FREE ALLOYS - TIN, SILVER AND COPPER |
| GEIA STD 0005-3 : 2013 | PERFORMANCE TESTING FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC INTERCONNECTS CONTAINING PB-FREE SOLDER AND FINISHES |
| GEIA HB 649 : 2005 | CONFIGURATION MANAGEMENT STANDARD IMPLEMENTATION GUIDE |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC 2225 : 0 | SECTIONAL DESIGN STANDARD FOR ORGANIC MULTICHIP MODULES (MCM-L) AND MCM-L ASSEMBLIES |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC J STD 033C-1:2014 | HANDLING, PACKING, SHIPPING AND USE OF MOISTURE, REFLOW, AND PROCESS SENSITIVE DEVICES |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| GEIA STD 0005-2 : 2012 | MITIGATING THE EFFECTS OF TIN WHISKERS IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| IPC J STD 002 : D | SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES |
| GEIA HB 0005-1 : 2006 | PROGRAM MANAGEMENT/SYSTEMS ENGINEERING GUIDELINES FOR MANAGING THE TRANSITION TO LEAD-FREE ELECTRONICS |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| IEC 61191-1:2013 | Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| IPC 2222 : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| IPC 9701 : A | PERFORMANCE TEST METHODS AND QUALIFICATION REQUIREMENTS FOR SURFACE MOUNT SOLDER ATTACHMENTS |
| IPC J STD 028 : 0 | PERFORMANCE STANDARD FOR CONSTRUCTION OF FLIP CHIP AND CHIP SCALE BUMPS |
| IPC J STD 003 : C | SOLDERABILITY TESTS FOR PRINTED BOARDS |
| ARINC 671 : 2006 | GUIDANCE FOR THE TRANSITION TO LEAD-FREE SOLDERING, MAINTENANCE, AND REPAIR |
| IPC 6013 : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS |
| IPC 6015 : 0 | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR ORGANIC MULTICHIP MODULE MOUNTING AND INTERCONNECTING STRUCTURES |
| GEIA EIA649B:2011 | CONFIGURATION MANAGEMENT STANDARD |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| IPC 2223 : C | SECTIONAL DESIGN STANDARD FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS |
| IPC 6012 : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.