ENV 1991-3:1995/AC:1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - TRAFFIC LOADS ON BRIDGES
09-01-2003
01-12-2013
Introduction
1 General
2 Classification of actions
3 Design situations and requirements
4 Road traffic actions and other actions specifically
for highway bridges
5 Pedestrian, cycle and other actions specifically
for footbridges
6 Railway traffic actions and other actions specifically
for railway bridges
Annex F (normative) Basis for the fatigue assessment of
railway structures
Annex G (normative) Basis of design: supplementary clauses
to ENV 1991-1 for railway bridges including serviceability
criteria
Annex H (informative) Dynamic analysis where there is a risk
of resonance or excessive vibrations of railway structures:
basis of the supplementary calculations
Annex J (normative) Models for traffic loads in transient
situations
Annex S (informative) Additional guidance
Annex T (normative) Design documents
Annex X (normative) Summary of boxed values indicated in
ENV 1991-3:1995 and reference clause in this NAD
Annex Y (normative) Fatigue load models for highway bridges
Figures
4.5.1 - Locations of special vehicles
6.5.4.1(a) - Graph of relationship between track resistance
and relative movement for ballasted track
6.5.4.1(b) - Graph of relationship between track resistance
and relative movement for directly fastened track
6.4(a) - Characteristic values of actions +-q2k for class 90
power car passing under simple horizontal surfaces 4.5m and
5.0m above the track, compared with ENV 1991-3:1995, 6.6.3
F03.1 - Influence line shapes
H.1 - S1 and S2 for equal and symmetric groups of axle loads
H.2 - S1, S2, S3 and X for assymetric and unequal groups
of axle loads
Tables
4.5.1 - Partial factors on actions in the ultimate limit
state for highway bridges
4.5.2 - Partial factors on actions in the serviceability
limit state for highway bridges
4.5.3 - Combination and reduction factors for highway bridges
for the ultimate limit state
4.5.4 - Combination and reduction factors for highway bridges
for the serviceability limit state
4.5.5 - Adjustment factors aQ for axle loads for highway
bridges
4.5.6 - Adjustment factors aq for distributed loads for
highway bridges
4.5.7 - Factors on characteristic actions for combination of
actions for highway bridges (ULS)
4.5.8 - Factors on characteristic actions for characteristic
(rare) combination of actions for highway bridges (SLS)
4.5.9 - Factors on characteristic actions for infrequent
combination of actions for highway bridges (SLS)
4.5.10 - Factors on characteristic actions for frequent
combination of actions for highway bridges (SLS)
6.2(a) - Additional and amended values of determinant length
L
6.6(a) - Assessment of groups of traffic loads (characteristic
values of the multi-component actions)
F.3 - Light traffic mix
F.3.1 - Load spectra for heavy traffic mix, influence line 1,
giving number of cycles per year (in thousands) expressed as
proportion of load model 71 x Phi 2, PL71, for various influence
line lengths
F.3.2 - Load spectra for heavy traffic mix, influence line 2,
giving number of cycles per year (in thousands) expressed as
proportion of load model 71 x Phi2, PL71, for various
influence line lengths
F.3.3 - Load spectra for heavy traffic mix, influence line 3,
giving number of cycles per year (in thousands) expressed as
proportion of load mode 71 x Phi 2, PL71, for various
influence line lengths
F.3.4 - Load spectra for standard traffic mix, influence line
1, giving number of cycles per year (in thousands) expressed
as proportion of load model 71 x Phi 2, PL71, for various
influence line lengths
F.3.5 - Load spectra for standard traffic mix, influence line
2, giving number of cycles per year (in thousands) expressed
as proportion of load model 71 x Phi 2< PL71, for various
influence line lengths
F.3.6 - Load spectra for standard traffic mix, influence line
3, giving number of cycles per year (in thousands) expressed
as proportion of load model 71 x Phi 2, PL71, for various
influence line lengths
F.3.7 - Load spectra for light traffic mix, influence line 1,
giving number of cycles per year (in thousands) expressed as
proportion of load model 71 x Phi2, PL71, for various
influence line lengths
F.3.8 - Load spectra for light traffic mix, influence line 2,
giving number of cycles per year (in thousands) expressed as
proportion of load model 71 x Phi2, PL71, for various
influence line lengths
F.3.9 - Load spectra for light traffic mix, influence line
3, giving number of cycles per year (in thousands) expressed
as proportion of load model 71 x Phi2, PL71, for various
influence line lengths
G.1/2(a) - Numerical values for y and Psi factors for
persistant and transient situations (excluding accidental
situations)
G.1/2(b) - Numerical values for y and Psi factors for
accidental situations
X.1 - Boxed values indicated in ENV 1991-3:1995 and values
specified in this NAD
Y.1 - Typical traffic flow models for use on UK primary routes
Defines actions and general principles for the structural design of building and civil engineering works. Covers design for construction conditions and structural desing for temporary structures. Not intended directly for the appraisal of existing construction, in developing the design of alterations and repairs, or assessing changes of use, but used where applicable.
Committee |
CEN/TC 250
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF ENV 1991-3 : 97 XP | Corresponds |
NEN NVN ENV 1991-3 : 1995 | Identical |
UNE-ENV 1991-3:1998 | Identical |
NEN NAD NVN ENV 1991-3 : 2002 | Identical |
DD ENV 1991-3:2000 | Corresponds |
NBN ENV 1991-3 : 2002 | Identical |
DIN V ENV 1991-3:1996-08 | Identical |
UNI ENV 1991-3 : 1998 | Identical |
I.S. ENV 1991-4:1995 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 4: ACTIONS IN SILOS AND TANKS |
09/30186448 DC : 0 | BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
I.S. ENV 1999-2:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 2: STRUCTURES SUSCEPTIBLE TO FATIGUE |
I.S. ENV 1991-2-5:1997 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 2-5: ACTIONS ON STRUCTURES - THERMAL ACTIONS |
16/30342037 DC : 0 | BS EN 13941-1 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 1: DESIGN |
03/313805 DC : DRAFT AUG 2003 | EN 14067-4 - RAILWAY APPLICATIONS - AERODYNAMICS - PART 4: REQUIREMENTS AND TEST PROCEDURES FOR AERODYNAMICS ON OPEN TRACK |
I.S. EN 13941:2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
PREN 13941 : DRAFT 2009 | DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
NFP 22 311 : 92 AMD 2 2002 XP | STEEL CONSTRUCTION - EUROCODE 3: "DESIGN OF STEEL STRUCTURES" AND NATIONAL APPLICATION DOCUMENT - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
I.S. ENV 1994-2:1998 | EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: COMPOSITE BRIDGES |
I.S. ENV 1991-2-7:1999 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 2-7: ACTIONS ON STRUCTURES - ACCIDENTAL ACTIONS DUE TO IMPACT AND EXPLOSIONS |
UNI EN 13941 : 2011 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
DD ENV 1994-2:2001 | Eurocode 4. Design of composite steel and concrete structures Composite bridges (together with United Kingdom National Application Document) |
DD ENV 1991-2.6 : 2000 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 2-6: ACTIONS ON STRUCTURES - ACTIONS DURING EXECUTION |
DD ENV 1999-2:2000 | Eurocode 9. Design of aluminium structures Structures susceptible to fatigue |
I.S. ENV 1993-2:1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
BS EN 13941 : 2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
ENV 1993-2 : 1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
EN 13941:2009+A1:2010 | Design and installation of preinsulated bonded pipe systems for district heating |
DD ENV 1991-2.4 : 1997 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - PART 2-4: ACTIONS ON STRUCTURES - WIND ACTIONS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
DD ENV 1992 PT2 : DRAFT APR 2001 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES PART 2: CONCRETE BRIDGES |
DD ENV 1991-4:1996 | Basis of design and actions on structures Actions in silos and tanks |
ENV 1991-2-1 : DRAFT 1995 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - DENSITIES, SELF-WEIGHT AND IMPOSED LOADS |
ENV 1991-4 : DRAFT 95 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS IN SILOS AND TANKS |
ENV 1991-2-3 : 1995 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - SNOW LOADS |
ENV 1991-5 : 1998 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES |
ENV 1991-2-6 : DRAFT 1997 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - ACTIONS DURING EXECUTION |
ENV 1991-1 : DRAFT 1994 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - BASIS OF DESIGN |
ENV 1991-2-2 : 1995 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
ENV 1991-2-4 : 1995 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - WIND ACTIONS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
ENV 1991-2-7 : DRAFT 98 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - ACCIDENTAL ACTIONS DUE TO IMPACT AND EXPLOSIONS |
ENV 1991-2-5 : DRAFT AUG 1997 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - THERMAL ACTIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.