EN ISO 6272-1:2011
Current
Current
The latest, up-to-date edition.
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
Published date
08-15-2011
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Sampling
6 Test panels
7 Procedure
8 Precision
9 Test report
ISO 6272-1:2011 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions.NOTE The terms "impact" and "impact resistance" are used in the title and text of ISO 6272-1, but an important characteristic of the apparatus used is that it should produce rapid deformation rather than a true impact.The method described can be appliedeither as a pass/fail test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification;or as a classification test, to determine, by gradually increasing the drop height and/or the mass, the minimum mass and/or drop height for which the coating cracks or peels from its substrate.
| Committee |
CEN/TC 139
|
| DevelopmentNote |
Supersedes EN ISO 6272. (06/2004)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 6272-1:2011 | Identical |
| NF EN ISO 6272-1 : 2011 | Identical |
| NBN EN ISO 6272-1 : 2011 | Identical |
| NEN EN ISO 6272-1 : 2011 | Identical |
| UNE-EN ISO 6272-1:2012 | Identical |
| NS EN ISO 6272-1 : 2011 | Identical |
| I.S. EN ISO 6272-1:2011 | Identical |
| PN EN ISO 6272-1 : 2011 | Identical |
| SN EN ISO 6272-1:2011 | Identical |
| UNI EN ISO 6272-1 : 2013 | Identical |
| SS-EN ISO 6272-1:2011 | Identical |
| BS EN ISO 6272-1:2011 | Identical |
| DIN EN ISO 6272-1:2011-11 | Identical |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 12/30256076 DC | BS EN 12899-1 AMD1. Fixed, vertical road traffic signs. Part 1. Fixed signs |
| 08/30175210 DC : DRAFT APR 2008 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN 1396:2015-06 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 13523-5:2014 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| 12/30268958 DC : 0 | BS EN 13523-5 - COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| PREN 13813 : DRAFT 2017 | SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 13523-5:2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN 1396:2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| 13/30286946 DC : 0 | BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| ONORM EN 14236 : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| PREN 13523-5 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN 1396:2007 | Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 13523-5 : 2014 | COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST) |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN 13523-5:2014-08 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
| BS EN 13523-5:2014 | Coil coated metals. Test methods Resistance to rapid deformation (impact test) |
| UNE-EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| 17/30371000 DC : 0 | BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
| PREN 1396 : DRAFT 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| I.S. CWA 15596:2006 | CODE OF PRACTICE ON CLEANABILITY OF COMMERCIAL FOOD EQUIPMENT USED IN THE RETAIL AND CATERING SECTORS |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.