EN ISO 5801:2017
Current
Current
The latest, up-to-date edition.
Fans - Performance testing using standardized airways (ISO 5801:2017)
Published date
10-25-2017
Publisher
Sorry this product is not available in your region.
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols, abbreviated terms and subscripts
5 General
6 Test configurations
7 Carrying out the test
8 Airways for duct simulations
9 Standardized test chambers
10 Various component parts for a laboratory setup
11 Standard test configurations
12 Measurements
13 Reference conditions
14 General rules for conversion of test results
15 Calculations
16 Fan characteristic curves
17 Uncertainty analysis
Annex A (normative) - Determination of air flow rate
Annex B (informative) - Fan-powered roof exhaust
ventilators
Annex C (informative) - Chamber leakage test
procedure
Annex D (informative) - Fan outlet elbow in the case
of a non-horizontal discharge axis
Annex E (informative) - Input power calculation for
driven fans at design point
Annex F (informative) - Motor fed from a variable
frequency speed device
Annex G (informative) - Axial fans without outlet
guide vanes
Annex H (informative) - Vapour pressure, p[v]
Annex I (informative) - Clearances
Annex J (normative) - Polytropic approach for the
calculation of p[fC] from p[fTe]
Annex K (informative) - Examples for test setups
Annex L (informative) - Measurement of plenum
fans and plug fans
Annex M (informative) - Comparison of NEMA
methodology for calculation motor
efficiency with IEC
Annex N (informative) - Report and results of test
Bibliography
ISO 5801:2017 specifies procedures for the determination of the performance of fans of all types except those designed solely for air circulation, e.g. ceiling fans and table fans. Testing of jet fans is described in ISO 13350.ISO 5801:2017 provides estimates of uncertainty of measurement and rules for the conversion, within specified limits, of test results for changes in speed, gas handled and, in the case of model tests, size are given.
| Committee |
CEN/TC 156
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN ISO 5801 : 2017 | Identical |
| PN EN ISO 5801 : 2017 | Identical |
| NBN EN ISO 5801 : 2009 | Identical |
| NS EN ISO 5801 : 2017 | Identical |
| ISO 5801:2017 | Identical |
| SS-EN ISO 5801:2017 | Identical |
| SN EN ISO 5801 : 2017 | Identical |
| NF EN ISO 5801 : 2017 | Identical |
| UNI EN ISO 5801:2018 | Identical |
| UNI EN ISO 5801 : 2009 | Identical |
| I.S. EN ISO 5801:2017 | Identical |
| UNE-EN ISO 5801:2010 | Identical |
| BS EN ISO 5801:2017 | Identical |
| I.S. EN ISO 5801:2008 | Identical |
| DIN EN ISO 5801:2011-11 | Identical |
| ONORM EN ISO 5801 : 2018 | Identical |
| DIN EN ISO 5801:2018-04 | Identical |
| UNE-EN ISO 5801:2019 | Identical |
| BS EN 12102:2013 | Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level |
| EN 16905-4:2017 | Gas-fired endothermic engine driven heat pumps - Part 4: Test methods |
| DIN EN 13141-11:2015-07 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS |
| I.S. EN 16798-5-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 5-1: CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION AND AIR CONDITIONING SYSTEMS (MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - METHOD 1: DISTRIBUTION AND GENERATION |
| NF EN 50216-12 : 2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| UNE-EN 13141-11:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units |
| I.S. EN 16905-4:2017 | GAS-FIRED ENDOTHERMIC ENGINE DRIVEN HEAT PUMPS - PART 4: TEST METHODS |
| UNI EN 12102 : 2014 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
| NF EN 13141-4 : 2011 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 4: FANS USED IN RESIDENTIAL VENTILATION SYSTEMS |
| DIN EN 13141-6:2015-02 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING |
| BS EN 12101-3:2015 | Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans) |
| I.S. EN 13141-6:2014 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING |
| EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| EN 13141-11:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units |
| EN 12102:2013 | Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level |
| EN 328:2014 | Heat exchangers - Forced convection unit air coolers for refrigeration - Test procedures for establishing the performance |
| DIN EN 16147:2017-08 | Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units (includes Corrigendum :2017) |
| I.S. EN 16475-2:2017 | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
| 12/30271386 DC : 0 | BS EN 12102 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
| PREN 13141-5 : DRAFT 2017 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| DIN EN 16440-1:2015-05 | TESTING METHODOLOGIES OF REFRIGERATING DEVICES FOR INSULATED MEANS OF TRANSPORT - PART 1: MECHANICAL COOLING DEVICE WITH FORCED AIR CIRCULATION EVAPORATOR WITH OR WITHOUT HEATING DEVICE |
| BS EN 16905-4:2017 | Gas-fired endothermic engine driven heat pumps Test methods |
| 15/30324456 DC : 0 | BS EN 16147 - HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS |
| PREN 13053 : DRAFT 2017 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| I.S. EN 12102:2013 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
| PREN 12102-2 : DRAFT 2016 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS |
| DIN EN 16905-4:2015-10 (Draft) | GAS-FIRED ENDOTHERMIC ENGINE DRIVEN HEAT PUMPS - PART 4: TEST METHODS |
| DIN EN 12101-3:2015-12 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| DIN EN 327:2014-11 | HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS - TEST PROCEDURES FOR ESTABLISHING PERFORMANCE |
| UNE-EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| I.S. EN 327:2014 | HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS - TEST PROCEDURE FOR ESTABLISHING PERFORMANCE |
| I.S. EN 13141-4:2011 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 4: FANS USED IN RESIDENTIAL VENTILATION SYSTEMS |
| DIN EN 13141-4:2011-09 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems |
| I.S. EN 328:2014 | HEAT EXCHANGERS - FORCED CONVECTION UNIT AIR COOLERS FOR REFRIGERATION - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE |
| I.S. EN 12101-3:2015 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| I.S. EN 14986:2017 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| UNE-EN 16147:2017 | Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units. (Consolidated version) |
| 15/30299483 DC : 0 | BS EN 16798-5-1 - ENERGY PERFORMANCE OF BUILDINGS - MODULES M5-6, M5-8, M6-5, M6-8, M7-5, M7-8 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION AND AIR CONDITIONING SYSTEMS - PART 5-1: DISTRIBUTION AND GENERATION (REVISION OF EN 15241) - METHOD 1 |
| 16/30345760 DC : 0 | BS EN 12102-2 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS |
| 11/30253126 DC : 0 | BS EN 16282-9 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 9: CAPTURE AND CONTAINMENT PERFORMANCE OF EXTRACTION SYSTEMS - TEST METHODS |
| I.S. EN 50216-12:2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| 14/30303765 DC : 0 | BS EN 16282-9 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 9: CAPTURE AND CONTAINMENT PERFORMANCE OF EXTRACTION SYSTEMS - TEST METHODS |
| BS EN 16147:2017 | Heat pumps with electrically driven compressors. Testing, performance rating and requirements for marking of domestic hot water units |
| PREN 12102 : DRAFT 2012 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
| EN 13141-4:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems |
| BS EN 13141-11:2015 | Ventilation for buildings. Performance testing of components/products for residential ventilation Supply ventilation units |
| DIN EN 16475-2:2013-08 (Draft) | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
| PREN 16147 : DRAFT 2015 | HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS |
| 15/30326260 DC : 0 | BS EN 16905-4 - GAS-FIRED ENDOTHERMIC ENGINE HEAT PUMPS - PART 4: TEST METHODS |
| BS EN 16440-1:2015 | Testing methodologies of refrigerating devices for insulated means of transport Mechanical cooling device with forced air circulation evaporator with or without heating device |
| I.S. EN 13141-11:2015 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS |
| EN 16798-5-1:2017 | Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation |
| 17/30339487 DC : 0 | BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
| DIN EN 328:2014-11 | HEAT EXCHANGERS - FORCED CONVECTION UNIT AIR COOLERS FOR REFRIGERATION - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE |
| BS EN 14986:2007 | Design of fans working in potentially explosive atmospheres |
| UNE-EN 328:2015 | Heat exchangers - Forced convection unit air coolers for refrigeration - Test procedures for establishing the performance |
| UNE-EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| UNE-EN 327:2015 | Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedures for establishing performance |
| BS EN 13141-4:2011 | Ventilation for buildings. Performance testing of components/products for residential ventilation Fans used in residential ventilation systems |
| UNE-EN 13141-6:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
| UNE-EN 13141-4:2012 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems |
| EN 327:2014 | Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedures for establishing performance |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN 16440-1:2015 | Testing methodologies of refrigerating devices for insulated means of transport - Part 1: Mechanical cooling device with forced air circulation evaporator with or without heating device |
| EN 16475-2:2017 | Chimneys - Accessories - Part 2: Chimney fans - Requirements and test methods |
| DIN EN 16147:2015-08 (Draft) | HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING, PERFORMANCE RATING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS |
| UNE-EN 16440-1:2015 | Testing methodologies of refrigerating devices for insulated means of transport - Part 1: Mechanical cooling device with forced air circulation evaporator with or without heating device |
| BS EN 16475-2:2017 | Chimneys. Accessories Chimney fans. Requirements and test methods |
| BS EN 50216-12:2011 | Power transformer and reactor fittings Fans |
| I.S. EN 16440-1:2015 | TESTING METHODOLOGIES OF REFRIGERATING DEVICES FOR INSULATED MEANS OF TRANSPORT - PART 1: MECHANICAL COOLING DEVICE WITH FORCED AIR CIRCULATION EVAPORATOR WITH OR WITHOUT HEATING DEVICE |
| I.S. EN 12102-1:2017 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS, PROCESS CHILLERS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 1: AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS FOR SPACE HEATING AND COOLING, DEHUMIDIFIERS AND PROCESS CHILLERS |
| I.S. EN 16147:2017 | HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING, PERFORMANCE RATING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS |
| 17/30332536 DC : 0 | BS EN 13141-5 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 5: COWLS AND ROOF OUTLET TERMINAL DEVICES |
| BS EN 16798-5-1:2017 | Energy performance of buildings. Ventilation for buildings Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 1: Distribution and generation |
| EN 12102-1:2017 | Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers |
| UNI EN 13141-4 : 2011 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 4: FANS USED IN RESIDENTIAL VENTILATION SYSTEMS |
| BS EN 328:2014 | Heat exchangers. Forced convection unit air coolers for refrigeration. Test procedures for establishing the performance |
| BS EN 327:2014 | Heat exchangers. Forced convection air cooled refrigerant condensers. Test procedures for establishing performance |
| BS EN 13141-6:2014 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust ventilation system packages used in a single dwelling |
| DIN EN 12102:2013-10 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
| EN 13141-6:2014 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
| ISO 5802:2001 | Industrial fans — Performance testing in situ |
| ISO 13348:2007 | Industrial fans — Tolerances, methods of conversion and technical data presentation |
| ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| IEC 60051-4:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4: Special requirements for frequency meters |
| ISO 2533:1975 | Standard Atmosphere |
| ISO 5389:2005 | Turbocompressors — Performance test code |
| ISO 13350:2015 | Fans — Performance testing of jet fans |
| IEC 60051-2:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters |
| IEC 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 60034-2-2:2010 | Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 |
| ISO 12759:2010 | Fans Efficiency classification for fans |
| IEC 60034-30:2008 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| ISO 5136:2003 | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
| ISO 13349:2010 | Fans — Vocabulary and definitions of categories |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.