EN ISO 3170:2004
Current
Current
The latest, up-to-date edition.
Petroleum liquids - Manual sampling (ISO 3170:2004)
Published date
02-01-2004
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles
5 Apparatus
5.1 General
5.2 Tank samplers
5.3 Drum and can samplers
5.4 Pipeline samplers
5.5 Sample receivers, vessels and containers
5.6 Container closures
5.7 Sample coolers
6 Safety precautions
7 Procedures for homogeneous petroleum liquids
7.1 Introduction
7.2 Precautions
7.3 Tank sampling
7.4 Pipeline sampling
7.5 Dispenser (nozzle) sampling
8 Procedures for crude oils and other non-homogeneous
petroleum liquids
8.1 General
8.2 Procedures
9 Sample handling
9.1 General
9.2 Homogenization of samples
9.3 Verification of mixing efficiency
9.4 Transfer of samples
10 Sampling of tank residues/deposits
11 Package sampling
11.1 Statistical aspects of sampling packages
11.2 Procedures for sampling packages
Annex A (informative) Guidance on safety precautions
Bibliography
ISO 3170:2004 specifies the manual methods to be used for obtaining samples of liquid or semi-liquid hydrocarbons, tank residues and deposits from fixed tanks, railcars, road vehicles, ships and barges, drums and cans, or from liquids being pumped in pipelines.ISO 3170:2004 applies to the sampling of petroleum products, crude oils and intermediate products, which are stored in tanks at or near atmospheric pressure, or transferred by pipelines, and are handled as liquids at temperatures from near ambient up to 200 degrees Celsius.The sampling procedures specified are not intended for the sampling of special petroleum products which are the subject of other International Standards, such as electrical insulating oils (IEC 60475), liquefied petroleum gases (ISO 4257), liquefied natural gases (ISO 8943) and gaseous natural gases (ISO 10715).
| Committee |
CEN/TC 19
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| ISO 3170:2004 | Identical |
| BS 2000-475(2004) : 2004 | Identical |
| SN EN ISO 3170 : 2004 | Identical |
| DIN EN ISO 3170:2004-06 | Identical |
| NS EN ISO 3170 : 2ED 2004 | Identical |
| SS-EN ISO 3170:2004 | Identical |
| NEN EN ISO 3170 : 2004 | Identical |
| UNE-EN ISO 3170:2004 | Identical |
| NBN EN ISO 3170 : 2004 | Identical |
| I.S. EN ISO 3170:2004 | Identical |
| BS EN ISO 3170:2004 | Identical |
| IP 475 : 2005 | Identical |
| PN EN ISO 3170 : 2006 | Identical |
| UNI EN ISO 3170 : 2005 | Identical |
| NF EN ISO 3170 : 2004 | Identical |
| BS 2000-609(2012) : 2012 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS EN 16734 : 2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| 13/30275105 DC : 0 | BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15721:2014 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
| 14/30299493 DC : 0 | BS EN 14112 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| DIN EN 16136:2015-04 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 09/30206692 DC : 0 | BS EN 228 - AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| BS EN 16997:2017 | Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method |
| PD CEN/TR 16557:2013 | Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination |
| 10/30228224 DC : 0 | BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| DIN EN 16900 E : 2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| BS EN 16329:2013 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method |
| I.S. EN 14517:2004 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| 12/30267087 DC : 0 | BS EN 16476 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOLD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| I.S. EN 14078:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN 15837:2009 | Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
| I.S. EN 12662:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| S.R. CEN TR 15367-2:2007 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 2: AUTOMOTIVE PETROL FUELS |
| BS 2000-579(2009) : 2009 COR 2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| 09/30205523 DC : 0 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| BS EN 16761-1:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using single column technique |
| 06/30147351 DC : DRAFT MAR 2006 | EN 15486 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULPHUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD |
| BS EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
| I.S. EN 116:2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| UNE-EN 16934:2018 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| BS 2000-465(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 13/30274224 DC : 0 | BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN 15938:2010 | Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity |
| UNE-EN 14865-1:2010 | Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
| DIN EN 15794:2010-02 | Determination of explosion points of flammable liquids |
| 14/30294038 DC : 0 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHY METHOD |
| DIN EN 15691:2009-07 | Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method |
| DIN EN 15692:2009-08 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| BS 2000-606(2015) : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 16143:2013 | Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis |
| S.R. CEN TS 15293:2011 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| 12/30258729 DC : 0 | BS EN 15721 - ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| I.S. EN 14522:2005 | DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS |
| BS EN 16135:2011 | Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS) |
| 11/30244505 DC : 0 | BS EN 16294 - PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICPOES) |
| PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
| I.S. EN 16144:2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| 13/30277078 DC : 0 | BS EN 16568 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| DD CEN/TS 15293:2011 | Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods |
| BS EN 15944:2010 | Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| 12/30264358 DC : 0 | BS EN 1601 - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| IP 606 : 2016 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| PD CEN/TR 17103:2017 | Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination |
| 08/30181649 DC : DRAFT JULY 2008 | BS EN 15837 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC DIRECT METHOD |
| 06/30147357 DC : DRAFT MAR 2006 | EN 15488 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| IP PM EA : 2013 | DETERMINATION OF THE FILTER BLOCKING TENDENCY OF FATTY ACID METHYL ESTERS (FAME) AND DIESEL FUELS CONTAINING FAME - COLD SOAK AND FILTRATION METHOD |
| S.R. CEN/TR 16557:2013 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
| IP 336 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| IP 309 : 2016 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| I.S. EN 16934:2017 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| S.R. CEN/TS 15940:2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16143:2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| I.S. EN 15837:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| I.S. EN 16715:2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| UNE-EN 15779:2010 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (>= 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| BS 2000-595(2011) : 2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS EN 12916:2016 | Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection |
| DIN EN 16997:2016-05 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| S.R. CWA 16379:2011 | FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS |
| BS 2000-509(2013) : 2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS |
| 17/30363912 DC : 0 | BS EN 17178 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| S.R. CEN/TR 17103:2017 | FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
| EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| BS 2000-547(2006) : 2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS 2000-574(2014) : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| I.S. EN 13016-3:2018 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| I.S. CEN TR 15522-1:2006 | OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 1: SAMPLING |
| BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| I.S. EN 15484:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
| I.S. EN 13132:2000 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY USING COLUMN SWITCHING |
| I.S. EN 228:2017 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15553:2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| BS EN 14538:2006 | Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| BS EN 14517:2004 | Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method |
| BS EN 15490:2007 | Ethanol as a blending component for petrol. Determination of pHe |
| BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
| BS EN 15487:2007 | Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method |
| BS EN ISO 20783-2:2003 | Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFB |
| BS EN 15485:2007 | Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method |
| BS EN 15199-2:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Heavy distillates and residual fuel |
| BS EN 15491:2007 | Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method |
| BS EN 12662:2014 | Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| BS EN 14077:2003 | Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method |
| BS EN 14078:2014 | Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method |
| DIN EN 15490:2007-11 | Ethanol as a blending component for petrol - Determination of pHe |
| DIN EN 15938:2010-12 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 12766-1:2000 | Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| ONORM EN 15491 : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
| DIN EN 228:2004-03 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN 15485:2007-11 | Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method |
| DIN EN 15488:2007-11 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
| DIN EN 15489:2007-11 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
| DIN EN 15944:2011-02 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| DIN EN 15199-1:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| CEN/TS 16640:2014 | Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method |
| DIN EN 1601:2017-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| DIN EN 15484:2007-11 | Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method |
| EN 13016-2:2007 | Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure(AVP) between 40 C and 100 C |
| EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| DIN EN 14832:2005-09 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
| ONORM EN 15691 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| UNI EN 16568:2023 | Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| I.S. EN 14865-2:2006 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| DIN EN 16294:2013-02 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| PREN 12662 : DRAFT 2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| 14/30294041 DC : 0 | BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS |
| BS 2000-606(2012) : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 16715:2015 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| S.R. CWA 15940:2009 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| PREN 16135 : DRAFT 2010 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS) |
| 13/30286630 DC : 0 | BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 05/30143114 DC : DRAFT DEC 2005 | EN 13016-2 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C |
| I.S. EN 14213:2003 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| 13/30277780 DC : 0 | BS EN 16576 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DISTILLATE FUELS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS 2000-552(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
| BS 2000-581(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| 08/30183846 DC : DRAFT AUG 2008 | BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| 05/30143111 DC : DRAFT DEC 2005 | EN 13016-1 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| DIN EN 16761-1:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| ONORM EN 15199-3 : 2009 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| UNE-EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| BS EN 16270:2015 | Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method |
| I.S. EN 16734:2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| 16/30336853 DC : 0 | BS EN 16997 - LIQUID PETROLEUM PRODUCT - DETERMINATION OF SULFUR CONTENT IN ETHANOL CONTAINING PETROL E85 - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| 12/30268200 DC : 0 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| 06/30147366 DC : DRAFT MAR 2006 | EN 15491 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
| I.S. EN 16900:2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| PREN 15487 : DRAFT 2006 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
| DIN EN 15721:2013-12 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| 14/30298209 DC : 0 | BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| 06/30147369 DC : 0 | EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - ION CHROMATOGRAPHIC METHOD |
| BS 2000-555(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
| DIN EN 15751 E : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping Prevention of cross contamination |
| 10/30205520 DC : 0 | BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| PREN 13016-3 : DRAFT 2016 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| PREN 15195 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| 06/30147360 DC : DRAFT MAR 2006 | EN 15489 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD |
| DIN EN 15492:2012-04 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| 06/30147363 DC : DRAFT MAR 2006 | EN 15490 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE |
| PREN 15721 : DRAFT 2012 | ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| PREN 17057 : DRAFT 2016 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| BS EN 15199-4:2015 | Petroleum products. Determination of boiling range distribution by gas chromatography method Light fractions of crude oil |
| BS 2000-480(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| BS 2000-589(2015) : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS 2000-557(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE |
| I.S. EN 15199-3:2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| PREN 15492 : DRAFT 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| I.S. EN 15376:2014 | AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| CR 13840:2000 | Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method |
| PREN 16761-2 : DRAFT 2014 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| UNE-EN 16896:2017 | Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter |
| BS 2000-588(2011) : 2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15492:2012 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| DIN EN 15940:2016-09 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16136:2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 16091:2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| I.S. EN 61221:2004 | PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| BS 2000-462(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-462: PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 1: SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
| CR 13838:2000 | Automotive diesel fuels - Determination of filtrability - AGELFI method |
| UNI EN 15691 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| BS EN 16136:2015 | Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| UNI EN 16091 : 2012 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| UNI EN 15492 : 2012 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| DIN EN 590:2017-10 | Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017) |
| UNE-EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN 17057:2018 | Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID |
| UNI EN 15779 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15794 : 2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| I.S. EN 14865-1:2009 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| I.S. EN 15692:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| I.S. EN 237:2004 | LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| I.S. EN 12916:2016 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| I.S. EN 15491:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
| I.S. EN 15486:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD |
| I.S. EN 15691:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| DIN EN 1601:2016-06 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| DIN EN 13016-2:2007-11 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C |
| DIN EN 12662:2014-07 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| DIN EN 14105:2011-07 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents |
| DIN EN 14275:2013-05 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 1601:2018 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| ISO 4263-2:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 2: Procedure for category HFC hydraulic fluids |
| BS EN ISO 14935:1999 | Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids |
| UNE-EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| I.S. EN ISO 8754:2003 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 15199-2:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| I.S. EN 15199-1:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| DIN EN 12662:1998-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EN 14112:2016 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| I.S. EN 14105:2011 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS |
| UNI EN 14105 : 2011 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS |
| I.S. EN 14275:2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS |
| EN 15199-1:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| EN 15199-3:2008 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| I.S. EN 14112:2016 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| EN 15199-2:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| EN 14105:2011 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents |
| DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS EN 16576:2014 | Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| BS 2000-239(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-239: DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS) |
| UNI EN 15751 : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS EN 15199-3:2008 | Petroleum products. Determination of boiling range distribution by gas chromatography method Crude oil |
| 08/30176795 DC : DRAFT APR 2008 | BS EN 15779 - FATS AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES - DETERMINATION OF POLY-UNSATURATED FATTY ACID METHYL ESTERS BY GAS CHROMATOGRAPHY |
| 01/122379 DC : DRAFT JULY 2001 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| BS EN 15751:2014 | Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method |
| 10/30216576 DC : 0 | BS EN 16091 - LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| 14/30300905 DC : 0 | BS EN 16761-2 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| PD CEN/TR 16514:2013 | Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol |
| 07/30169525 DC : 0 | BS EN 15721 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| 13/30282501 DC : 0 | BS EN 15195 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| BS 2000-309(2015) : 2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| 09/30199323 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS |
| DIN EN 15779:2013-12 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (<groesser |
| 14/30295249 DC : 0 | BS EN 16715 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| BS 2000-156(2007) : 2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| I.S. EN 16896:2016 | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| BS 2000-433(1999) : 1999 | PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE S-RAY FLUORESCENCE SPECTROMETRY (IDENTICAL WITH IP 433/1999) |
| 10/30228221 DC : 0 | BS EN 16135 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS) |
| UNI EN 15692 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| 03/314577 DC : DRAFT OCT 2003 | EN 14832 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF PHOSPHATE ESTER FLUIDS |
| 16/30339201 DC : 0 | BS EN 1601 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| 11/30251420 DC : 0 | BS EN 16329 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS EN 16761-2:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using heart cut technique |
| BS EN 16934:2017 | Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE |
| PREN 15488 : DRAFT 2006 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| UNI EN 15721 : 2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| 15/30325297 DC : 0 | BS EN 16896 - PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER VISCOMETER |
| DIN EN 15751:2014-06 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| I.S. EN 15199-4:2015 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| BS 2000-489(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) |
| 11/30242687 DC : DRAFT APR 2011 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
| IP PM ED : 2009 | DETERMINATION OF LEAD, NICKEL, CHROMIUM, COPPER, ZINC, ARSENIC, CADMIUM, THALLIUM, ANTIMONY, COBALT, MANGANESE AND VANADIUM IN DISTILLATE TYPE BURNER FUELS DERIVED FROM WASTE MINERAL OILS - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY METHOD |
| 06/30147345 DC : DRAFT MAR 2006 | EN 15484 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
| BS EN 15794:2009 | Determination of explosion points of flammable liquids |
| 16/30346963 DC : 0 | BS EN 17057 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| 09/30185734 DC : 0 | BS EN 116/BS 2000-309 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT |
| 12/30266121 DC : 0 | BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| 14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| BS EN 16144:2012 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method |
| BS 2000-4(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-4: DETERMINATION OF ASH |
| UNE-EN 16807:2017 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
| BS 2000-563(2011) : 2011 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| BS 2000-605(2013) : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| BS 2000-571(2013) : 2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| 01/124546 DC : DRAFT JAN 2002 | PREN 237 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| 10/30216579 DC : 0 | BS EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| BS EN 15492:2012 | Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method |
| BS EN 14865-1 : 2009 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| PREN 590 : DRAFT 2011 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| 14/30310326 DC : 0 | BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| BS EN 14832:2005 | Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| DIN EN 16144:2012-05 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| BS 2000-553(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| IP 498 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 16761-2:2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| I.S. CWA 15145:2005 | AUTOMOTIVE FUELS - WATER IN DIESEL FUEL EMULSIONS FOR USE IN INTERNAL COMBUSTION ENGINES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16734:2017 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TR 15367-3 : 2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| I.S. EN 16997:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| BS 2000-79(2009) : 2009 COR 2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS 2000-428(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-428: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| EN 15692:2009 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| BS 2000-556(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHODOUR EN GRAPHITE |
| BS 2000-576(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| I.S. EN 15940:2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| EN 13016-1:2018 | Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| UNE-EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| PREN 14078 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| DIN EN 12916:2016-06 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| NF EN 15938 : 2011 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| UNI EN 16143 : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| PREN 17178 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| DIN EN 16900:2015-09 (Draft) | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15490:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE |
| S.R. CR 13837:2000 | AUTOMOTIVE DIESEL FUELS - DETERMINATION OF FILTRABILITY - SFPP METHOD |
| I.S. EN 15489:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD |
| I.S. EN 12766-1:2000 | PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
| I.S. EN 14538:2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| S.R. CR 13838:2000 | AUTOMOTIVE DIESEL FUELS - DETERMINATION OF FILTRABILITY - AGELFI METHOD |
| I.S. EN 15492:2012 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| UNE-EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method. (Consolidated version) |
| CEN/TR 15367-1:2014 | Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels |
| BS EN 241:2000 | Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method |
| BS EN ISO 6245:2002 | Methods of test for petroleum and its products. BS 2000-4: Determination of ash |
| BS EN ISO 8754:2003 | Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry |
| UNE-EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| UNE-EN 15944:2011 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| DIN EN 228:2017-08 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| EN ISO 20783-2:2003 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
| EN ISO 20823:2003 | Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003) |
| EN ISO 8754:2003 | Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003) |
| EN 16576:2014 | Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| UNI EN 15938 : 2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| UNI EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| UNI EN 14078 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| UNI EN 14865-2 : 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| UNI EN 14275 : 2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS |
| UNI EN 15944 : 2011 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| UNI EN 12662 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EN 16934:2017 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| DIN EN 16896:2015-09 (Draft) | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| UNE-EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| DIN EN 16091:2012-02 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| DIN EN 16329:2013-07 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| 06/30147354 DC : DRAFT MAR 2006 | EN 15487 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
| I.S. CEN TR 15367-3:2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| BS 2000-409(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C |
| BS 2000-612(2013) : 2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS 2000-394(2001) : 2001 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) |
| 15/30330667 DC : 0 | BS EN 16934 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTER (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| DIN EN 16143:2013-05 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| DIN EN 13016-1:2007-11 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT |
| UNI EN 16476 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| 14/30297823 DC : 0 | BS EN 15199-4 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| IP PM EC : 2009(R2016) | DETERMINATION OF THE FATTY ACID METHYL ESTER CONTENT OF AVIATION TURBINE FUEL - SOLID PHASE EXTRACTION AND GAS CHROMATOGRAPHY METHOD |
| 09/30207063 DC : 0 | BS EN 14105 - FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENT (REFERENCE METHOD) |
| PD CEN/TR 15367-1:2014 | Petroleum products. Guidelines for good housekeeping Automotive diesel fuels |
| I.S. EN 15195:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| 14/30304453 DC : 0 | BS EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| I.S. EN 13016-2:2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C |
| UNI EN 15837 : 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| CR 13837:2000 | Automotive diesel fuels - Determination of filtrability - SFPP method |
| 04/30113923 DC : DRAFT MAY 2004 | EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| CEN/TR 16557:2013 | Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination |
| PREN 228 : DRAFT 2009 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| BS EN 16896:2016 | Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter |
| I.S. EN 15779:2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-539(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD |
| BS 2000-156(2005) : 2005 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 156: DETERMINATION OF HYDROCARBON TYPES IN PETROLEUM PRODUCTS - FLUORESCENT INDICATOR ADSORPTION METHOD |
| UNI EN 14865-1 : 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| IP PM ET : 2016 | CRUDE OIL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| BS EN 15779 : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-620(2014) : 2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| BS 2000-464(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| DIN EN 16476:2014-07 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| PREN 14538 : DRAFT 2002 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA AND MG CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| PREN 14214 : DRAFT 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| CR 13839:2000 | Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method |
| 09/30200031 DC : 0 | BS EN 15938 - AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| 06/30148611 DC : DRAFT MAR 2006 | EN 15485 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULPHUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| 08/30176860 DC : DRAFT APR 2008 | BS EN 15794 - DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| PREN 116 : DRAFT 2009 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT |
| BS EN 16568:2014 | Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| 07/30164228 DC : 0 | BS EN 15691 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| 15/30326182 DC : 0 | BS EN 16906 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| BS EN 16807:2016 | Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants |
| 15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| UNE-EN 16091:2012 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| EI HM 68 : 2011 | PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS |
| 07/30166903 DC : DRAFT AUG 2007 | BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF CONTAMINATION IN MIDDLE DISTILLATES |
| 03/314578 DC : DRAFT OCT 2003 | EN 14833 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF PHOSPHATE ESTER FLUIDS |
| 02/123664 DC : DRAFT SEP 2002 | BS EN 14538 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA AND MG CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| NF EN 15837 : 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| IP 399 : 2016 | DETERMINATION OF HYDROGEN SULPHIDE IN FUEL OILS |
| BS 2000-408(2014) : 2014 COR 2014 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| UNE-EN 16761-1:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| UNE-EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| UNE-EN 15376:2015 | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
| BS 2000-123(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| DIN EN 16568:2015-03 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| IP PM ES : 2016 | DETERMINATION OF COLD FILTER BLOCKING TENDENCY |
| UNI EN 15199-3 : 2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| BS 2000-498(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 16576:2014 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 13016-1:2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| I.S. EN 17057:2018 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| EN 590:2013 | Automotive fuels - Diesel - Requirements and test methods |
| I.S. EN 16807:2016 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| S.R. CEN/TR 16514:2013 | AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL |
| BS 2000-538(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
| PREN 1601 : DRAFT 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| I.S. CEN/TR 14489:2005 | FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
| I.S. EN 15938:2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| I.S. EN 16329:2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS 2000-394(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| BS EN 13016-1:2007 | Liquid petroleum products. Vapour pressure Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| 17/30361216 DC : 0 | BS EN 14110 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| CEN/TR 15367-2:2007 | Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels |
| 16/30336428 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| PREN 15293 : DRAFT 2016 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
| BS 2000-409(2001) : 2001 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C |
| I.S. CEN TR 15522-2:2006 | OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 2: ANALYTICAL METHODOLOGY AND INTERPRETATION OF RESULTS |
| I.S. EN 15944:2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| S.R. CR 13839:2000 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATICITY - [13]C NUCLEAR MAGNETIC RESONANCE (NMR) SPECTROMETRIC METHOD |
| S.R. CR 13840:2000 | PETROLEUM PRODUCTS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS - ULTRAVIOLET (UV) SPECTROMETRIC METHOD |
| I.S. EN 15794:2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| DIN EN 14865-2:2011-01 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010) |
| BS EN 15553:2007 | Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method |
| BS EN 14213:2003 | Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods |
| BS EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| BS EN 15484:2007 | Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method |
| BS EN ISO 20764:2003 | Methods of test for petroleum and its products Petroleum and related products. Preparation of a test portion of high-boiling liquids for the determination of water content. Nitrogen purge method |
| BS EN ISO 4263-2:2003 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for category HFC hydraulic fluids |
| BS EN 15488:2007 | Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method |
| BS EN 14833:2005 | Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| BS EN 15195:2014 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| BS EN 15486:2007 | Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| ISO 8754:2003 | Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry |
| BS EN 15489:2007 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method |
| BS EN 13016-2:2007 | Liquid petroleum products. Vapour pressure Determination of absolute vapour pressure (AVP) between 40°C and 100°C |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| UNE-EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| BS EN ISO 20823:2003 | Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test |
| BS EN 14112:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test) |
| DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
| ISO 20823:2003 | Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test |
| UNE-EN 15938:2011 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| BS EN 14275:2013 | Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers |
| ISO 14597:1997 | Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry |
| DIN EN 15553:2007-07 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| BS EN 14105:2011 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents |
| BS EN 15199-1:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Middle distillates and lubricating base oils |
| UNE-EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| UNE-EN 14275:2013 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
| DIN EN 15195:2015-02 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| CEN/TR 14489:2005 | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| EN 16294:2012 | Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN ISO 1516:2002 | Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002) |
| EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| EN 15489:2007 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
| EN 14865-1:2009+A1:2010 | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
| EN 1601:2017 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| EN ISO 3735:1999 | Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
| EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN 15488:2007 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
| EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| EN 13723:2002 | Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| EN 15779:2009+A1:2013 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| EN 15490:2007 | Ethanol as a blending component for petrol - Determination of pHe |
| EN 15486:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| EN 14517:2004 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method |
| EN 14832:2005 | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| EN 14538:2006 | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| EN 15487:2007 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
| EN 15376:2014 | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
| EN 15721:2013 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
| EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| EN 16568:2014 | Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| EN 237:2004 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| EN 15484:2007 | Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method |
| EN 16761-1:2015 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| EN 14331:2004 | Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method |
| EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| EN 241:2000 | Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method |
| EN 15938:2010 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 15691:2009 | Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method |
| EN 14275:2013 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
| EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN 16807:2016 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
| EN 16143:2013 | Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis |
| EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| EN ISO 14597:1999 | Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997) |
| EN 16091:2011 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| EN 15944:2010 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| EN 14077:2003 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method |
| EN 15837:2009 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| EN 15485:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| EN 14865-2:2006+A2:2010 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
| EN 16715:2015 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| EN 15492:2012 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| EN ISO 20764:2003 | Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003) |
| EN 16761-2:2015 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique |
| EN 16135:2011 | Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS) |
| EN 15794:2009 | Determination of explosion points of flammable liquids |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| EN ISO 4263-2:2003 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003) |
| EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| EN 16476:2014 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| EN 16906:2017 | Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method |
| EN 14833:2005 | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| DIN EN 16270:2015-08 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| 09/30206695 DC : 0 | BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 15367-2:2007 | Petroleum products. Guide for good housekeeping Automotive petrol fuels |
| DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| PREN 14110 : DRAFT 2017 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| BS 2000-507(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| DIN EN 14865-1:2011-01 | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010) |
| DIN EN 16135:2012-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 14/30300902 DC : 0 | BS EN 16761-1 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| BS EN 16294:2012 | Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| PREN 12916 : DRAFT 2014 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| BS EN 16476:2014 | Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| UNE-EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| IP PM EH : 2013 | DETERMINATION OF THE SOLVENT YELLOW 124 CONTENT OF KEROSINE AND GAS OIL - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD |
| I.S. EN 16568:2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| 08/30172824 DC : DRAFT JAN 2008 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| PREN 14112 : DRAFT 2014 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| PREN 16136 : DRAFT 2013 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS 2000-510(2004) : 2004 | PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD |
| I.S. EN 1601:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| IP 615 : 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| PD CEN/TR 15522-1:2006 | Oil spill identification. Waterborne petroleum and petroleum products Sampling |
| DIN EN 16476 E : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| 14/30312370 DC : 0 | BS EN 16807 - LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| DIN EN 16761-2:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| UNE-EN 16715:2016 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| 11/30249539 DC : 0 | BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
| DIN EN 15837:2010-04 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| 07/30164620 DC : 0 | BS EN 15692 - ETHANOL AS A BLENDING COMPONENT FOR GASOLINE - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| DIN EN 15376:2014-12 | AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN EN 15199-3:2008-09 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| NF EN 15944 : 2011 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| IP 41 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| BS 2000-129(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 129: DETERMINATION OF BROMINE NUMBER - COLOUR INDICATOR TITRATION METHOD |
| DIN EN 16576:2015-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 16/30327612 DC : 0 | BS EN 13016-3 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| BS EN 16906:2017 | Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method |
| 15/30325842 DC : 0 | BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| BS EN 16091:2011 | Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method |
| DIN EN 16715:2015-10 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| UNI EN 16135 : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 06/30152427 DC : 0 | BS EN 15199-3 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| UNI EN 16294 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS 2000-589(2011) : 2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS 2000-498(2014) : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 16270:2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 15692:2009 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method |
| 09/30201423 DC : 0 | BS EN 15944 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| BS EN 15376:2014 | Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods |
| BS EN 15721:2013 | Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method |
| IP 433 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| BS EN 15691:2009 | Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method |
| I.S. EN 16476:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| BS 2000-336(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-336: PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN 15199-4:2015-12 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| BS 2000-578(2009) : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-554(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF |
| NF EN 14865-1 : 2009 + A1 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| I.S. EN 15721:2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| S.R. CEN/TR 15367-1:2014 | PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS |
| UNE-EN 16761-2:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique |
| I.S. EN 16135:2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS 2000-574(2009) : 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
| I.S. EN 16906:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| I.S. EN 16294:2012 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| I.S. EN 16761-1:2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| I.S. EN 590:2013+A1:2017&LC:2017 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| PREN 17155 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
| DIN EN 16709:2015-12 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| 17/30360226 DC : 0 | BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
| UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
| DIN EN 16906:2015-09 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| BS 2000-572(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| DIN EN 16934:2015-12 (Draft) | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| EN 13016-3:2018 | Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) |
| IP 578 : 2015 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| UNE-EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| I.S. EN 14832:2005 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
| I.S. EN 15751:2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| I.S. CWA 15293:2005 | AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15488:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| I.S. EN 14077:2004 | PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD |
| I.S. EN 14331:2004 | LIQUID PETROLEUM PRODUCTS - SEPARATION AND CHARACTERISATION OF FATTY ACID METHYL ESTERS (FAME) FROM MIDDLE DISTILLATES - LIQUID CHROMATOGRAPHY (LC)/GAS CHROMATOGRAPHY (GC) METHOD |
| DIN EN 14078:2014-09 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| ISO 20764:2003 | Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method |
| BS EN 237:2004 | Methods of test for petroleum and its products BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry |
| UNE-EN 590:2014 | Automotive fuels - Diesel - Requirements and test methods |
| UNE-EN 14112:2017 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| BS EN 14331:2004 | Liquid petroleum products. Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates. Liquid chromatography (LC)/gas chromatography (GC) method |
| BS EN 116:2015 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method |
| BS EN 14865-2 : 2006 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| BS EN 13132:2000 | Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching |
| BS EN 1601:2017 | Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID) |
| BS EN 12766-1:2000 | Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| BS EN 13723:2002 | Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| CEN/TR 17103:2017 | Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
| DIN EN 15491:2007-11 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
| DIN EN 14331:2004-06 | Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method |
| DIN EN 237:2004-12 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| CEN/TS 15293:2011 | Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods |
| DIN EN 14077:2004-03 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method; German version EN 14077:2003 |
| DIN EN ISO 6245:2003-01 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| DIN EN 14214:2003-11 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14213:2003-11 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| EN 15553:2007 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| DIN EN 14517:2004-12 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-256: LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| DIN EN ISO 20764:2004-02 | Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003) |
| DIN EN 14833:2005-09 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
| DIN EN 15486:2007-11 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| DIN EN 15487:2007-11 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
| DIN EN 13723:2002-10 | PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES BY WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) |
| DIN EN 16896:2017-02 | Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter |
| CEN/TR 16514:2013 | Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol |
| CEN/TR 15522-1:2006 | Oil spill identification - Waterborne petroleum and petroleum products - Part 1: Sampling |
| ONORM EN 15692 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| CEN/TS 15940:2012 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| DIN EN 14522:2005-12 | Determination of the auto ignition temperature of gases and vapours |
| EN 15491:2007 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
| DIN EN 15199-2:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| DIN EN ISO 20823:2003-10 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE FLAMMABILITY CHARACTERISTICS OF FLUIDS IN CONTACT WITH HOT SURFACES - MANIFOLD IGNITION TEST |
| EN 13131:2000 | Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method |
| EN 13132:2000 | Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching |
| DIN EN 14078:2004-03 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| DIN EN 14538:2006-09 | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| UNE-EN 228:2013 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| ISO 3165:1976 | Sampling of chemical products for industrial use — Safety in sampling |
| ISO 8943:2007 | Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods |
| ISO 3007:1999 | Petroleum products and crude petroleum — Determination of vapour pressure — Reid method |
| ISO 3735:1999 | Crude petroleum and fuel oils Determination of sediment Extraction method |
| IEC 60475:2011 | Method of sampling insulating liquids |
| ISO 3734:1997 | Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method |
| ISO 4257:2001 | Liquefied petroleum gases Method of sampling |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO 10336:1997 | Crude petroleum — Determination of water — Potentiometric Karl Fischer titration method |
| ISO 10337:1997 | Crude petroleum — Determination of water — Coulometric Karl Fischer titration method |
| ISO 9029:1990 | Crude petroleum — Determination of water — Distillation method |
| ISO 9030:1990 | Crude petroleum — Determination of water and sediment — Centrifuge method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.