EN ISO 25762:2012
Current
The latest, up-to-date edition.
Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
01-25-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Fibre reinforcement
5 Fire characteristics
6 Fire test methods
Annex A (informative) - Heat release measurements
on FRP composites
Annex B (informative) - Typical results given for
glass-fibre-reinforced polymer composites
by ISO and EN fire test methods
Annex C (informative) - Recommendations for the
handling and storage of fibre-reinforced
polymer composites
Annex D (informative) - Procedure in the event of
fire involving fibre-reinforced polymer
composites
Annex E (informative) - Mounting and fixing of
test specimens of fibre-reinforced polymer
composites
Bibliography
ISO 25762:2009 gives guidelines for the assessment of the fire characteristics and fire performance of fibre-reinforced polymer (FRP) composites, particularly in structural applications in buildings and transport.It is applicable to FRP composites prepared from thermosetting or thermoplastic resins and reinforced with inorganic fibres greater than 7,5 mm in length.It gives guidelines on:the applicability of product types (e.g. sheets, laminates, profiled sections and some sandwich constructions) to end-use performance;the test methods and performance criteria for different physical forms of FRP test specimen.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN ISO 25762 : 2012 | Identical |
| PN EN ISO 25762 : 2012 | Identical |
| SN EN ISO 25762:2012 | Identical |
| BS EN ISO 25762:2012 | Identical |
| ISO 25762:2009 | Identical |
| NF EN ISO 25762 : 2012 | Identical |
| NBN EN ISO 25762 : 2012 | Identical |
| DIN EN ISO 25762:2012-04 | Identical |
| NS EN ISO 25762 : 2012 | Identical |
| I.S. EN ISO 25762:2012 | Identical |
| UNE-EN ISO 25762:2012 | Identical |
| NEN EN ISO 25762 : 2012 | Identical |
| ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| ISO 1268-1:2001 | Fibre-reinforced plastics Methods of producing test plates Part 1: General conditions |
| ISO 5658-2:2006 | Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration |
| ISO 13784-2:2002 | Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms |
| ISO 10093:1998 | Plastics Fire tests Standard ignition sources |
| ISO 9705:1993 | Fire tests Full-scale room test for surface products |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| ISO 16312-1:2016 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria |
| ISO 5659-2:2017 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test |
| ISO 5660-2:2002 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
| ISO 1268-4:2005 | Fibre-reinforced plastics — Methods of producing test plates — Part 4: Moulding of prepregs |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| ISO 1268-7:2001 | Fibre-reinforced plastics Methods of producing test plates Part 7: Resin transfer moulding |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO 24473:2008 | Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| ISO 13785-2:2002 | Reaction-to-fire tests for façades — Part 2: Large-scale test |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO/TS 5658-1:2006 | Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
| ISO 1268-6:2002 | Fibre-reinforced plastics — Methods of producing test plates — Part 6: Pultrusion moulding |
| ISO 1268-10:2005 | Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens |
| ISO/TR 9705-2:2001 | Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance |
| ISO 1268-8:2004 | Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 10840:2008 | Plastics — Guidance for the use of standard fire tests |
| ISO 1268-2:2001 | Fibre-reinforced plastics Methods of producing test plates Part 2: Contact and spray-up moulding |
| ISO 15791-1:2014 | Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance |
| ISO/TR 5660-3:2003 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement |
| ISO 14696:2009 | Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL) |
| ISO 13571:2012 | Life-threatening components of fire — Guidelines for the estimation of time to compromised tenability in fires |
| ISO 19706:2011 | Guidelines for assessing the fire threat to people |
| ISO/TR 16312-2:2007 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
| CEN/TS 15447:2006 | Mounting and fixing in reaction to fire tests under the Construction Products Directive |
| ISO 13784-1:2014 | Reaction to fire test for sandwich panel building systems — Part 1: Small room test |
| ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
| ISO 1268-5:2001 | Fibre-reinforced plastics Methods of producing test plates Part 5: Filament winding |
| ISO 21367:2007 | Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens |
| ISO 1268-11:2005 | Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates |
| ISO 13927:2015 | Plastics — Simple heat release test using a conical radiant heater and a thermopile detector |
| ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
| ISO 1268-9:2003 | Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC |
| ISO 1268-3:2000 | Fibre-reinforced plastics Methods of producing test plates Part 3: Wet compression moulding |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.