EN ISO 22794:2009
Current
The latest, up-to-date edition.
Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15)
08-19-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Implantable materials
5 Technical file
5.1 Contents
5.2 Chemical composition
5.3 Physical properties
5.4 Intended applications, precautions, warnings
and instructions
5.5 Preclinical and clinical evaluation
5.6 Manufacture
5.7 Materials of animal origin
5.8 Sterilization
5.9 Packaging
5.10 Additional information supplied by the manufacturer
Bibliography
ISO 22794:2007 applies to implantable materials, whether resorbable or non-resorbable, used as dental devices for filling and augmenting bones in oral and maxillofacial surgery. Products that are essentially pure (greater than 90 %) hydroxyapatite are not covered by this International Standard.Evaluation includes the physico-chemical, mechanical, biological and clinical aspects and behaviour of these implantable dental materials.
| Committee |
CEN/TC 55
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN ISO 22794 : 2009 | Identical |
| BS EN ISO 22794:2009 | Identical |
| NF EN ISO 22794 : DEC 2009 | Identical |
| I.S. EN ISO 22794:2009 | Identical |
| UNE-EN ISO 22794:2010 | Identical |
| ISO 22794:2007 | Identical |
| PN EN ISO 22794 : 2010 | Identical |
| NBN EN ISO 22794 : 2009 | Identical |
| SN EN ISO 22794:2010 | Identical |
| DIN EN ISO 22794:2009-11 | Identical |
| NEN EN ISO 22794 : 2009 | Identical |
| UNI EN ISO 22794 : 2009 | Identical |
| DIN EN 1642:2012-06 | Dentistry - Medical devices for dentistry - Dental implants |
| I.S. EN 1642:2011 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - DENTAL IMPLANTS |
| UNI EN 1642 : 2012 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - DENTAL IMPLANTS |
| 08/30184615 DC : DRAFT SEP 2008 | BS EN 1642 - DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - DENTAL IMPLANTS |
| UNE-EN 1642:2012 | Dentistry - Medical devices for dentistry - Dental implants |
| EN 1642:2011 | Dentistry - Medical devices for dentistry - Dental implants |
| BS EN 1642:2011 | Dentistry. Medical devices for dentistry. Dental implants |
| ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 10993-3:2014 | Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity |
| ISO 10993-4:2017 | Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| ISO 14155-2:2003 | Clinical investigation of medical devices for human subjects Part 2: Clinical investigation plans |
| ISO 13779-1:2008 | Implants for surgery Hydroxyapatite Part 1: Ceramic hydroxyapatite |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 14155-1:2003 | Clinical investigation of medical devices for human subjects Part 1: General requirements |
| ISO 10993-2:2006 | Biological evaluation of medical devices — Part 2: Animal welfare requirements |
| ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives Part 1: Application of risk management |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 14630:2012 | Non-active surgical implants — General requirements |
| ISO/TR 14283:2004 | Implants for surgery Fundamental principles |
| EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
| ISO 10993-10:2010 | Biological evaluation of medical devices Part 10: Tests for irritation and skin sensitization |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| ISO 1942:2009 | Dentistry Vocabulary |
| ISO 10993-11:2017 | Biological evaluation of medical devices — Part 11: Tests for systemic toxicity |
| ISO 10993-12:2012 | Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
| ISO 10993-7:2008 | Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals |
| ISO 10993-17:2002 | Biological evaluation of medical devices — Part 17: Establishment of allowable limits for leachable substances |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
| ISO 22442-2:2015 | Medical devices utilizing animal tissues and their derivatives Part 2: Controls on sourcing, collection and handling |
| ISO 10993-9:2009 | Biological evaluation of medical devices Part 9: Framework for identification and quantification of potential degradation products |
| ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives — Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| EN 980:2008 | Symbols for use in the labelling of medical devices |
| ISO 10993-6:2016 | Biological evaluation of medical devices Part 6: Tests for local effects after implantation |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 15223:2000 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.