EN ISO 21809-5:2017
Current
The latest, up-to-date edition.
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
08-02-2017
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 General requirements
6 Information supplied by the purchaser
7 Materials
8 Concrete mix
9 Coating application
10 Curing methods
11 Inspection and testing
12 Repair of concrete coated pipe
13 Markings
14 Handling and storage
15 Test reports and inspection documents
Annex A (normative) - Water absorption test
Annex B (normative) - Shear resistance test
Bibliography
ISO 21809-5:2017 specifies the requirements for qualification, application, testing and handling of materials required for the application of reinforced concrete coating externally to either bare pipe or pre-coated pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.The external application of concrete is primarily used for the negative buoyancy of pipes used in buried or submerged pipeline systems and/or for the mechanical protection of the pipe and its pre-coating.ISO 21809-5:2017 is applicable to concrete thicknesses of 25 mm or greater.
| Committee |
CEN/TC 459/SC 10
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN ISO 21809-5 : 2017 | Identical |
| SN EN ISO 21809-5 : 2017 | Identical |
| I.S. EN ISO 21809-5:2017 | Identical |
| ONORM EN ISO 21809-5 : 2018 | Identical |
| ISO 21809-5:2017 | Identical |
| DIN EN ISO 21809-5:2019-01 | Identical |
| DIN EN ISO 21809-5:2010-09 | Identical |
| NBN EN ISO 21809-5 : 2010 | Identical |
| UNI EN ISO 21809-5 : 2010 | Identical |
| NF EN ISO 21809-5 : 2017 | Identical |
| NS EN ISO 21809-5 : 2017 | Identical |
| PN EN ISO 21809-5 : 2017 | Identical |
| UNE-EN ISO 21809-5:2018 | Identical |
| BS EN ISO 21809-5:2017 | Identical |
| UNI EN ISO 21809-5:2024 | Identical |
| ISO 21809-2:2014 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| ISO 16120-2:2017 | Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general purpose wire rod |
| ASTM C 171 : 2016 : REDLINE | Standard Specification for Sheet Materials for Curing Concrete |
| EN 10244-2:2009 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
| EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| ASTM C 331 : 2005 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM C 1240 : 2015 : REDLINE | Standard Specification for Silica Fume Used in Cementitious Mixtures |
| ASTM C 642 : 2013 : REDLINE | Standard Test Method for Density, Absorption, and Voids in Hardened Concrete |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| ASTM D 4643 : 2017 : REDLINE | Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
| ASTM C 637 : 2014 : REDLINE | Standard Specification for Aggregates for Radiation-Shielding Concrete |
| ASTM C 332 : 2017 : REDLINE | Standard Specification for Lightweight Aggregates for Insulating Concrete |
| ASTM C 309 : 2011 : REDLINE | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
| ISO 1920-5:2004 | Testing of concrete Part 5: Properties of hardened concrete other than strength |
| ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| ASTM C 330 : 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ASTM D 4959 : 2016 : REDLINE | Standard Test Method for Determination of Water Content of Soil By Direct Heating |
| EN 450-1:2012 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
| ASTM A 810 : 2001 : R2008 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
| ASTM C 40 : 2004 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| ASTM C 1176 : 2005 | Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table |
| ACI 308.1 : 2011 | SPECIFICATION FOR CURING CONCRETE |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.