EN ISO 19879:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
04-12-2021
09-15-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Repeated assembly test
6 Leakage test
7 Proof test
8 Burst test
9 Cyclic endurance test
10 Vacuum test
11 Overtightening test
12 Vibration test
13 Cyclic endurance (impulse) test with vibration
14 Identification statement (reference to this International
Standard)
Annex A (normative) Test data form
Bibliography
ISO 19879:2010 specifies uniform methods for the testing and performance evaluation of metallic tube connections, stud ends for ports and flange connections for use in hydraulic fluid power applications. ISO 19879:2010 does not apply to the testing of hydraulic quick-action couplings, which is covered by ISO 7241-2.Tests outlined in ISO 19879:2010 are independent of each other and document the method to follow for each test. See the appropriate component International Standard for which tests to conduct and for performance criteria.For qualification of the connector, the minimum number of samples specified in ISO 19879:2010 is tested, unless otherwise specified in the relevant connector standard or as agreed upon by the manufacturer and the user.
| Committee |
CEN/TC 459/SC 10
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SN EN ISO 19879 : 2011 | Identical |
| UNI EN ISO 19879 : 2011 | Identical |
| DIN EN ISO 19879:2011-01 | Identical |
| PN EN ISO 19879 : 2011 | Identical |
| UNE-EN ISO 19879:2010 | Identical |
| NBN EN ISO 19879 : 2010 | Identical |
| BS EN ISO 19879:2010 | Identical |
| NEN EN ISO 19879 : 2010 | Identical |
| NS EN ISO 19879 : 1ED 2010 | Identical |
| I.S. EN ISO 19879:2010 | Identical |
| ISO 19879:2010 | Identical |
| NF EN ISO 19879 : 2010 | Identical |
| ONORM EN ISO 19879 : 2010 | Identical |
| DIN EN ISO 19879:2019-04 (Draft) | Identical |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
| I.S. EN 746-2:2010 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| DIN EN 746-2:2011-02 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| UNI EN 746-2 : 2011 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| ISO 11926-2:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 9974-3:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 6162-2:2012 | Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| ISO 1179-4:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| ISO 7241-2:2000 | Hydraulic fluid power Quick-action couplings Part 2: Test methods |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| ISO 11926-3:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends |
| ISO/TR 11340:1994 | Rubber and rubber products Hydraulic hose assemblies External leakage classification for hydraulic systems |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 1179-2:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 1179-3:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.