EN ISO 19225:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
03-30-2022
12-20-2017
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective
measures
6 Verification of the safety requirements
and/or protective measures
7 Information for use
Annex A (normative) - Noise test code
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the essential requirements
of Directive 2006/42/EC aimed to be covered
ISO 19225:2017 specifies safety requirements to minimize the hazards listed in Clause 4 that can occur during the assembly, use, maintenance, repair, decommissioning, disassembly and disposal of shearer loaders and plough systems when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, in underground mining.ISO 19225:2017 does not cover any hazards resulting from explosive atmospheres. Requirements for explosive atmospheres can be found in ISO/IEC 80079‑38.ISO 19225:2017 is not applicable to machines that are manufactured before the date of its publication.
| Committee |
CEN/TC 196
|
| DevelopmentNote |
Supersedes EN 1552. (12/2017) NEW CHILD AMD 1 IS NOW ADDED
|
| DocumentType |
Standard
|
| ProductNote |
NEW CHILD AMD 1 IS NOW ADDED
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| PN EN ISO 19225 : 2018 | Identical |
| DIN EN ISO 19225:2016-02 (Draft) | Identical |
| DIN EN ISO 19225:2018-04 | Identical |
| DIN EN ISO 19225 E : 2018 | Identical |
| UNE-EN ISO 19225:2019 | Identical |
| BS EN ISO 19225:2017 | Identical |
| I.S. EN ISO 19225:2017 | Identical |
| NS EN ISO 19225 : 2017 | Identical |
| NF EN ISO 19225 : 2017 | Identical |
| ONORM EN ISO 19225 : 2018 | Identical |
| SN EN ISO 19225:2018 | Identical |
| UNI EN ISO 19225:2020 | Identical |
| ISO 19225:2017 | Identical |
| NEN EN ISO 19225 : 2018 | Identical |
| IEC 61439-4:2012 | Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 12508:1994 | Earth-moving machinery Operator station and maintenance areas Bluntness of edges |
| ISO 9355-1:1999 | Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
| ISO 15380:2016 | Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
| ISO 9244:2008 | Earth-moving machinery Machine safety labels General principles |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| ISO 6405-1:2017 | Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols |
| ISO 3457:2003 | Earth-moving machinery — Guards — Definitions and requirements |
| ISO 3864-3:2012 | Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| IEC 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification |
| ISO 19353:2015 | Safety of machinery Fire prevention and fire protection |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| IEC 61439-2:2011 | Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.